Name two-stage infrared flame detector
Model FDUI-5000 / C
operating voltage DC24V ± 20% (non-polar)
wiring terminal insertion station of formula
After power indicator green, red and yellow lights are flashing 10 times (about 20 seconds)
green light: Steady is operating normally
red indicator: Lights when the fire alarm
yellow indicator: Lit (operating voltage failure excessively high or low)
when the current consumption standby 16mA, 36mA alarm
output contact capacity 5A / 250VAC or 5A / 30VDC
detection method for detecting infrared rays (wavelength 3.9 m - 4.3m)
detecting distance 25m (GB certification distance of 25 meters)
detected horizontal fan angle, 90 ° vertical
sensitivity settings adjustable sensitivity gear 4 (for details refer to the adjustment mode dial switch)
time setting 5s, 6s, 8s, 10s time setting (for details, refer to the adjustment mode dial switch)
Communication relay switch output
4-20mA current output
RS-485 can support up to 256 output the output
temperature - 40 degrees to +80 degrees
relative humidity of 0 ~ 95RH
protection IP65
Explosion Proof Exd IIC T6
size 104mm × 90mm × 104mm
Weight about 1 Kg
material aluminum
color yellow bottom ash cover
installation site corner / ceiling
parts subsidiary bracket
Details exercise power: 13061288935
