Preface: mobile broadband equipment Beijing sent a TV box, Model: Huawei EC6110M. Suffer no TV at home, after connecting the monitor and Bluetooth speaker sound and picture are not synchronized, TV movies really can not see, so it is not useless. Some time ago to engage in private use routers to build a network disk, persevering too weak router processing power, memory is too small, poor performance. Ever since, I want to use the TV box replacement router set up a private network storage. And was followed by a long break road ......
The first step in the backup firmware EC6110
(To prevent later want to restore, prevent the toss to save the brick tiles to prevent ...... in short, the backup is very necessary)
The first few devices according to the United States
Backup firmware used tools
- ttl plate (usb serial transfer ttl)
- HiTool5.0.6
- A computer with
- A network cable
- Welding tools
Backup procedures
Disassemble (all toss all started in the first step teardown)
After connecting the TTL flying plate (Tx Rx GND) TTL Dupont line spot welding test
The network cable box connected to the computer network port, or router ports
Open HiTool software HiBurn
Configure port information
Selecting a corresponding serial number (abbreviated driver installation process), the server selection ip their computer, information is provided to the end plate to the computer the same segment; transmission mode selection network port
Connection terminal
Boot code running to view information from a terminal device partition window
Select programming eMMC tab
According to the production partition table partition information
In turn set the backup partition file
- After checking the partitions to back up click upload
Restart box to start the backup until backup success tips
Print Console # No. Description far away from success, patiently waiting for the data transfer is complete. If the console has been printing T is the transmission of meaning timeout, then you need to find out why FTP transfer failure is the cause of most of the firewall blocking, firewall settings to find HiTool, to allow