1, the global address pool DHCP experiment
1.1 Purpose
1.2 Experimental topology
1.3 Experimental addressing
1.4 Experimental Procedure
step1: According to experiments addressing, carry out the configuration, and enable the DHCP service
step2: Use the command, ip pool xxx create a global address pool
step3: the network command address range configured global address pool may be dynamically allocated, no mask is used by default natural mask, i.e. 24, which must be consistent with the network interface's network segment.
step4: use the command to set the IP address lease lease day, the default one day, an address pool, the same lease.
step5: Set egress gateway
step6: Some address configuration automatically assigned address pool
step7: Configuring DNS server
step8: do the same operation on another Interface
step9: open interface DHCP function
step10: Set dhcp mode on pc, and get to see the ip address, see pc1 and pc2 are to get the ip
