Configuring PPPoE Client

Topology

 

 

PPPoE configuration requires three steps

1. First, you need to configure a dial interface
2. dialer-rule for entering Dialer-rule view
3. interface dialer 1 Dialer interface for creating and entering dialer user user-name command to configure the remote user name, the user name must be the same as the PPP user name of the remote server.
4. dialer-group 1 As an interface for a dial-up access group
5. dialer bundle 1 is used to specify the bundle, the physical interface associated with the device interface Dialer Dialer Dialer bundle through the interface with the dial up.

1. Configure the PPPoE server

 

 

 

 

 

2. R2 in the G0 / 0/0 Bind virtual template

 

3. Create a legitimate account and password to be authenticated side of PPPoE

 

 

 

 

 

 Configuring PPPoE Client

Configuring R1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 5. Binding to the PPPoE dial interface Interface

6. The configuration of the present end of the default static routes PPPoE

 

7. Configure Client R3

 

 

 

 

 

 

8. Check R2

 

 9. Review R1

 

 10. Review R3