It's better to prepare a sieve for standby in case the sieve is damaged to affect the normal operation. Of course, we should use it carefully, avoid overload work so as to prolong its service life.
How to replace the sieve? Today, Luoyang Dahua will give you the general introduction. The detail methods are as follows:
1. Loose the clamp bolt, remove the up frame, replace the new sieve instead of the broken one.
2. When the customer replace the sieve, place the fine sieve above the coarse sieve, and put the up frame back to the original place. Then tension the fine sieve, tighten the up and bottom frame by universal plier.
3. Reput the clamp, move the universal plier, tighten the clamp bolt.
4. Strike the surround of clamp evenly by soft hammer, then tighten the copper nuts, the replacement work for sieve is finished.
5. User can repair the damaged coarse sieve by themselves. If you can not do it, please send back to the manufacture and it's better to buy one more coarse sieve for use.
Finally, it's better to buy the sieve from manufacture to ensure the quality and performance.