High viscosity magnetic pump can achieve zero leakage while transporting the high viscosity of the medium, what to pay attention to when to use it?
1, lubricate and cool the bearings of the pump depends mainly on the magnetic medium to be delivered, then the pump is not allowed to idle if the transmission medium containing particles, is the need to add filters.
2, if the power failure phenomenon during operation, but also a timely check, to avoid the emergence of no-load operation.
3, if the metal is present in particulate media, a magnetic filter to be added, to avoid damage to the magnetic drive.
4, if the transmission medium easy to crystallize, then you need to be thoroughly cleaned after use, do not let the media accumulate inside the pump.
5, since the magnetic drive magnets fear high temperature, so the pump, in use, the ambient temperature should be less than 40 ℃, the motor temperature may not exceed 75 ℃. High temperature magnetic pump will instantly degaussing.
6, the normal magnetic pump after 1000 hours operation, dismantling the bearing to be movable and the end face of the wear ring, and then not in the replacement of wearing parts.