Popular fiber jumper is a dielectric fiber optic cabling between the equipment and devices, has a thick protective layer. Optical and generally used in the terminal box between the application access network in optical fiber communication systems, optical fiber, some of the art fiber optic data transmission, and local area networks. So what is the MPO fiber optic patch cord and what type it? Easy communication sky following describes the specific ETU-LINK MPO fiber optic jumper herein.
What is the MPO jumper
MPO fiber jumpers, MPO (Multi-fiberPushOn) connector is a series of connectors, one MT, MT ferrule series are used around the ferrule end face two holes having a diameter of 0.7mm and introducer needle guide (also known as PIN needles) for precise connection. MPO connector to the fiber optic cable to produce a variety of processed forms of MPO jumper. MPO jumper can have 2 to 12 core design, most of the core 24 may be, it is the most current MPO connector 12 of the core. MPO connector compact design, so that the number of multi-core MPO jumper, a small volume.
Applications MPO patchcord
MPO is applied between different business premises LAN cabling active optical device within the optical link interconnecting a base station communication cabling, wiring inside the wiring residential areas, industrial parks room, room light signals within a commercial building built-up wiring connected to the optical fiber communication systems, cable television, telecommunications network local area network (LANs), wide area networks (WANs), FTTx.
MPO jumper in the wiring process should pay attention to the following points:
1. abutting fiber jumpers before proceeding to avoid the dust cap is opened. The panel has not yet been connected to the adapter for docking adapter interfaces Try not to remove the dust cap.
2. In addition to the normal docking, the connectors do not contact or scrape the polishing end surfaces with any other object.
3. If soiling occurs predictable end surface, to make use of special cleaning tool or ethanol wipes clean infiltration, not with a tissue, cotton wool, and other items common end surface cleaning swab.
4. When performing butt joint, the joint is positioned confirm key adapter or socket panel casting direction axial insertion, can not be repeated in the case where the plug can not see the end face.
Note that when the end of the grip portion of the joint bushing 5.MPO connector into an adapter, the grip portion is pulled out the connector housing.
6. When cables are bent, holding the cable bend radius greater than or equal to 20 times the diameter.
7. When cables are bundled, maintaining a suitable tightness, serious non-deformable cable sheath.
8. perforation of the cable, the tube wear, while pulling using pull manner operation, dragging or advancing the cable can not vigorously, to prevent scratching leads to broken skin or cable disconnection.
Common MPO fiber jumpers type:
Today, the application of fiber optic jumper MPO development and practice of engineering has an important role and significance, is widely used in life, greatly enhancing the popularity of optical networks. MPO fiber optic patch cord above type, easy daylight communications are provided, each fiber jumpers are subject to stringent quality control processes, including an end face inspection, return loss and insertion loss & 3D interferometer detection, thank you for your support!
Recommended: 100G optical modules QSFP28