Problem Description: There are two network cards on a computer, a network connection, a connection outside the network, but also to two network cards work at the same time, do not pull the network cable into the external network within the network, do not pull the network cable when connected to external networks ,How to do?
Solution:
In fact, no need to write routing (ie do not route command mode) can be achieved. (route command line can be found in my reprint of an article: http: //blog.csdn.net/dj0379/article/details/47102799)
Only you need to configure the two connecting metric, the hops are automatically canceled, the value is lower than the external network hop network hop value, can be achieved outside the network a higher priority than the network.
If the router's IP and IP within the network would have a conflict, or a change and let intranet and extranet not in the same network segment.
Modify metric approach is to configure the local IP address of the interface connection point "Advanced" button, which will have.
For more information about the Automatic Metric, interested students can see Microsoft's official description: http://support.microsoft.com/kb/299540/zh-cn
======== gorgeous dividing line: Here is my set an example for informational purposes only ========
---------------------
Author: dj0379
Source: CSDN
Original: https: //blog.csdn.net/dj0379/article/details/47101773
Disclaimer: This article as a blogger original article, reproduced, please attach Bowen link!