Establishing two chamfer lines cross, radial lines or infinitely long line. If the object is chamfered do not intersect, the system will automatically trim or extend to do a chamfer. Select Modify / chamfer command, or click the button chamfer, enter the chamfer or the command line to execute. After executing the command chamfering, both sides need to sequentially specified angle, the distance is set at two sides of the chamfer. Chamfer dimension will be determined by the two distances.
1. Click on the menu bar "Edit -> lead angle."
2. Click the Edit toolbar "lead angle command" button 
.
3. Chamfer input on the command line, and press Enter.
After the execution command, the command line displays the following information:
Command: Mx_Chamfer
( "Trim" mode) = 10.000 current chamfer distance 1, distance 2 = 10.000
Selecting a first straight line or [distance (D) / trimmer (T)]:
Select the second line:
