Detailed methods provided under Windows7 IPV6

IPV6 configuration under Windows 7 and Vista basic method is similar to note that, in view of the different campuses and other places of the network configuration environment, if configured as follows unsuccessful can further consult the network administrator, or select Internet customers end :)

Let's look at the two specific setting method it!

Step / Method

  1. Method, manual Easy Setup
    1, click the network connection icon in the notification area, click on the "Open Network and Sharing Center" (Open Network and Sharing Center)

    Picture this topic are as follows:

      
    2. In the Network and Sharing Center inside click "Change adapter settings" go to the "control panel \ network and Internet \ network connections" page
    picture this topic are as follows:


    picture this topic are as follows:

    3, connected to a local Wi-Fi or right click on properties, click IPV6 configuration attributes. Usually, of course, substantially straight-through cable connections are local, media companies are soft because the internal wireless network, so setting this property to a wireless network connection.
    Picture this topic are as follows:


    4, fill IPV6 content has been found (to obtain an address, for example: getv6.shu.edu.cn)

    Picture this subject as follows:

    Click OK, everything is OK!

    I am sure that the IPv4 settings fact, nothing different from the child, is, in fact, it is so simple.

  2. 方法二、命令行实现

    1、首先给出设置Windows7(Vista设置方法也一样)通过isatap上ipv6的方法:
    在开始菜单里输入cmd,然后在命令提示符上面点右键-以管理员身份运行(Run as Administrator),然后在命令行里输入如下信息:
      netsh(回车,下面都只要输入大于符号以后的内容,下同)
      netsh>int
      netsh>interface>ipv6
      netsh>interface>ipv6>isatap
      netsh>interface>ipv6>isatap>set router isatap.scu.edu.cn
      netsh>interface>ipv6>isatap>set state enabled
      netsh>interface>ipv6>isatap>quit
    这个命令行就是设置方法,要说明的就是那个router,就是isatap.scu.edu.cn这个东西,其实就是学校的隧道(isatap),一直都用这个隧道连接,结果怎么都连不上,现在当然知道是我们学校这个隧道根本没法在Windows7下面特别是64位系统下使用,结果偶然间就换了上大的dns,结果出来的结果居然是可以解析……直接百度了一下上大的isatap(其实不用百度也知道,从命名规则就能看出上大的isatap是isatap.shu.edu.cn),然后,可以上ipv6了。
    可是到此为止并没有结束。因为使用了上大的dns和isatap,结果上去上大的乐乎bt,下载的时候死活都没有连接,而且上6rank.edu.cn和ipv6.google.com都是可以上去的,说明确实已经是ipv6了,可是上乐乎bt就显示是ipv4,而且没bt连接……就是说这个用来下载的ipv6,结果没法下载,所以,又改了一下设置,去掉dns,让它自动获取,结果还是不行。于是就试着用其他大学的隧道连接,结果,hust(华中科大)的速度最好,而且上什么ipv6都没问题,看ipv6电视也没什么问题,就选定它了!
    现在你们看出来了?虽然百所高校都开通了ipv6,但是不是所有学校的都支持Windows7(或者说是很好的支持,因为有时候能上有时候不能),但是有几个大学的是肯定可以的,现在给出最常用速度最好的三个(上面已经提到两个了):
      isatap.tsinghua.edu.cn(清华大学的)
      isatap.shu.edu.cn (上大的)
      isatap.hust.edu.cn(华中科大的)
      isatap.sjtu.edu.cn (上交的)
    另外还有其他一些学校的也支持,可以专辑百度,多试试就能找出最快的了!比如中科大的可能速度也不错,但是貌似不是非常稳定。
    另外,用这个方法如果还是上不去,最好在设备管理器里点视图-查看隐藏设备,然后禁用那个teredo,如果能上就不用管这个了!
    还有,用这个方法的话,在本地连接里面还是现实ipv6是连接受限,可以不用管,照样用!
    本地连接的属性-tcp/ipv6属性里面一定都要自动获取,不能手动设置的哈!
    ipv6能干什么?!是的,除了能看点比较清晰的电视和10M/S(如果别人没限速可以达到20多)以外,好像也干不了其他什么,不过流量是免费的,上国外网站也可以,总算是对ipv4的一种补充,也是对缓慢的校园网和该死的对外网的***的一种“破解”吧!
    附,测试是否是IPV6的环境:
      进入 http://www.kame.net/
      如果是IPV4 看到下面网页里的小乌龟是静止的,是IPV6看到的是会游来游去,呵呵
      进入 http://ipv6.google.com
      如果不是IPV6的就打不开页面

    OK,到这儿,Windows7下面关于IPv6的这点事情就讲完了。

转自http://jingyan.baidu.com/article/9113f81bcb8ba92b3214c71f.html


ipv6的hosts下载地址:

http://code.google.com/p/ipv6-hosts/,替换C:\Windows\System32\drivers\etc\hosts

 

 

转载于:https://www.cnblogs.com/moiyer/archive/2011/11/02/2316158.html

Guess you like

Origin blog.csdn.net/weixin_33797791/article/details/94693173