Non-virtual machine under ubuntu connector boards
First install the Super Terminal minicom
sudo apt-get install minicom
After installing minicom, development boards need to be physically connected to computer. It requires the use of a cable, used to build the NFS network file system; also need a USB to serial cable for connecting Ubuntu. After doing a physical connection, configure minicom. In the following command input terminal
minicom -s
Then the following configuration options FIG.
Configured as in FIG.
Then save and exit
Output terminal
sudo minicom
Open minicom. Then turn on the power development board, if minicom configuration there is no problem, then boards the boot loading process should appear. After loading is complete, press ENTER. You will see something like interface.
