Source Address: http://www.searchnetworking.com.cn/showcontent_58081.htm
Microsoft System Center Operations Manager (SCOM) 2012 default installation package integrated in a useful technique is based on the new network monitoring engine "Smarts" technology, originally developed by EMC Corporation. SCOM 2012 will accurately identify the particular network device, and can monitor hundreds of devices, such as network switches and routers at a port, and the information server and a program associated health model.
SCOM 2012 after the discovery of network devices, automatically monitors the two devices - as well as Windows computers and other equipment before the discovery of the interface --- performance, errors and availability. Health and computer network equipment and devices are connected, powerful, clear logic. Select only monitor the primary interface for automatic nature, it is a clever approach can avoid collecting too much data interface performance.
In addition to all the familiar SCOM view folders and reports outside, SCOM 2012 network monitoring the introduction of four new desktop shortcut view, data transfer, namely network summary, nodes, interfaces, and near a desktop shortcut.
Network Summary view Desktop Shortcut
Network Summary view is the desktop shortcut folder hierarchy only new desktop shortcut is given in view of (the SCOM console navigation pane), so when you're looking for high-level overview of the monitored network device health, this is the first positions. Calls from other networks desktop shortcut summary desktop shortcut, or the selected Windows computer or network device task pane.
Figure A shows the seven components in the summary desktop shortcut. Network devices and interfaces These tools help you identify the slowest running, the busiest and most error mechanisms. Use Summary desktop shortcut, select nodes and interfaces for further analysis, then right-click or use the task pane, go to the network node or network interface desktop shortcut.
Figure A - Olympic Village network desktop shortcut provides the ability to identify all of the monitored network devices
Network node desktop shortcut view
Node is connected to a desired network device. Routers and switches are the most common node. Node desktop shortcut gives details of a particular device health. On the part of the quick view of the network node table includes the identification of the node and the "speed trap" instrument today, yesterday, last week and last month the node availability. (Load availability statistics, during the time monitoring is not as bit "available", the device does not display the newly discovered outage in the instrument.)
Node desktop shortcut lower half of the list contains all the interfaces on monitored nodes. From this view, you can manually choose to ignore automatically monitored by SCOM interface. By right-clicking a specific interface, you can go to view and report on performance, short or long term insight into the history of an interface. , On last week "switch 1" "4-port" packet analysis interface in the second window displayed in panel B.
FIG. B - transition from node interface packet forwarding plane view fast analysis
The network interface desktop shortcut view
Interface is a physical entity, using a network interface connection, such as port. By default, SCOM 2012 monitors only connected to other ports of windows monitored computer or device. Interface desktop shortcut view is the most detailed view of a particular interface. Through the interface, you can adjust a specific counter to zero, in order to carry out research and capacity planning issues.
Figure C shows the main counter (24 hours history for the front) on a specific interface. In this case, we view the "switch 4" on the Port-1. "I have the most wrong interface" in Figure A summary of the bottom of the desktop shortcut. With the gradual refinement of the interface, answer the following questions: What is the meaning of this interface error sending and receiving errors and discard figure shows only one kind of rare case of the bottom of the chart C, and therefore may not be a serious problem?.
Figure C - Network interface desktop shortcut: a specific interface in the past 24 hours
Network near a desktop shortcut
In the new SCOM 2012 network monitoring tools, the most striking view of the network may be close to a desktop shortcut. This graphically illustrates a view of a node and all other nodes of the Agent and windows - is connected to the node. You can switch up to five times to see if the computer is connected. FIG selected amount of a particular connection i, you can identify a router or a physical switch ports; For details, see Fig D.
Figure D- maintained a network close to all the features of a desktop shortcut using the SCOM2012 web console.
Limit network functionality approaching the first issue include only collaborative work with Windows computer (non-Linux computer); the relationship between the Hyper-V host / client is not considered; not the network interface group denoted as "group."
Close view of all network desktops and described herein shortcut similar, can run at full SCOM 2012 and SCOM 2012 page table workbench.
TechTarget Chinese original content, original link: http://www.searchnetworking.com.cn/showcontent_58081.htm
Reproduced in: https: //www.cnblogs.com/licheng/archive/2013/05/19/3086498.html