nmon analysis files meaning each sheet
sheet name | Meaning sheet |
SYS_SUMM | The system aggregates the blue line to change cpu share, the pink line is the change of disk IO; |
AAA | Some information about the operating system and nmon itself; |
BBBB | And a storage system attached storage capacity type; |
BBBC | The system attached storage location, status, and description information; |
BBBD | Disk adapter information; (disk that contains the adapter name and description) |
BBBE | And characterized by comprising a system device lsdev command acquired mapping relationship between the display and to hdisks vpaths; |
BBBG | Show Disk Group detailed mapping relationship; |
BBBL | Logical partitioning (LPAR) configuration details; |
BBBN | Network adapter information; |
BBBP | vmtune, schedtune, emstat and lsattr output command; |
CPUnn | Display performed between the CPU utilization, which comprises user%, sys%, wait% and idle%; |
CPU_ALL | All CPU overview displaying all CPU average occupancy, which includes SMT state; |
CPU_SUMM | Each CPU occupancy within the execution time, which includes user%, sys%, wait% and idle%; |
DGBUSY | Hdisk device for each disk group average occupancy; |
DGREAD | The average reading each disk group; |
DGSIZE | Each disk-leveling group (block size); |
DGWRITE | The average write each disk group; |
DGXFER | Each group of disk I / O operations per second; |
DISKBSIZE | Hdisk perform transmission block size for each of the time; |
DISKBUSY | Each hdisk device average occupancy; |
DISK READ | The average reading of the situation of each hdisk; |
DISKWRITE | Each hdisk average write circumstances; |
DISKXFER | Each hdisk of I / O operations per second; |
DISKSERV | This service time evaluation sheet shown in each collection interval hdisk (not response time) |
DISK_SUMM | Overall disk read and write I / O operations; |
EMCBSIZE/FAStBSIZE | The execution time of the transport block size EMC storage; |
EMCBUSY / Fast Busy | EMC storage equipment, the average occupancy; |
EMCREAD/FAStREAD | The average reading EMC storage case; |
EMCWRITE / FAStWRITE | The average write-EMC storage case; |
EMCXFER/FAStXFER | |
EMCSERV / Fast Serv | |
ESSBSIZE | The average size of the write data transfer operation in each of the recording sheet vpaths present in the system (blocksize) Kbytes |
ESSBUSY | ESS is busy recording sheet of the present system device in each case vpaths |
ESSREAD | This recording sheet at each reading operation in the system vpaths data rate (Kbytes / sec) |
ESSWRITE | This writing operation at each recording sheet vpaths in the system data rate (Kbytes / sec) |
ESSXFER | Per second each recording sheet of the present vpaths IO operations in the system |
ESSSERV | This service time evaluation sheet shown in each collection interval vpaths (not response time) |
FILE | This sheet contains a subset of statistical information within the kernel nmon, sar reports with the same value |
RFCS | |
IOADAPT | For each IO adapter BBBCsheet list containing the data transmission rate of read and write operations (kbit / s) and the total number of I / O operations performed |
JFSFILE | This sheet displayed for each file system, the percentage of the space of each interval duration being used |
JFSINODE | This sheet displayed for each file system, is being used in each interval duration inode percentage |
LARGEPAGE | This graph shows the change with time of Usedpages and Freepages |
LPAR | |
MEM | Existence of the number of free main photo on this sheet |
MEMUSE | In addition to the% comp parameter, all items contained in the report of this sheet are in the same order and vmtune |
MEMNEW | This sheet displays the memory allocated pieces of information, divided into three categories: user process page, file system cache, the system kernel page |
NET | This sheet display system data transmission rate for each network adapter (kilobytes / second) |
NETPACKET | This sheet count number for each read and write packet network adapter; This command is similar to netpmon -O dd |
NFS sheets | |
PAGE | This record statistics related page information sheet |
PROC | 本sheet包含nmon内核内部的统计信息。其中RunQueue和Swap-in域是使用的平均时间间隔,其他项的单位是比率/秒 |
PROCAIO | 本sheet包含关于可用的和active的异步IO进程数量信息. |
TOP | |
UARG | |
WLM sheets | |
ZZZZ | 本sheet自动转换所有nmon的时间戳为现在真实的时间,方便更容易的分析 |
nmon分析文件详细指标详解
指标类型 | 指标名称 |
指标含义 |
SYS_SUMM | CPU% |
cpu占有率变化情况; |
IO/sec |
IO的变化情况; |
|
AAA | AIX |
AIX版本号; |
build |
build版本号; |
|
command |
执行命令; |
|
cpus |
CPU数量; |
|
date |
执行日期; |
|
disks_per_line |
||
hardware | 被测主机处理器技术; |
|
host |
被测主机名; |
|
interval |
监控取样间隔;(秒) |
|
kernel |
被测主机内核信息; |
|
ML |
维护等级; |
|
progname |
执行文件名称; |
|
runname |
运行主机名称; |
|
snapshots |
实际快照次数; |
|
subversion |
nmon版本详情; |
|
time |
执行开始时间戳; |
|
user |
执行命令用户名; |
|
version |
收集数据的nmon版本; |
|
analyser |
nmon analyser版本号; |
|
environment |
所用excel版本; |
|
parms |
excel参数设定; |
|
settings |
excel环境设置; |
|
elapsed |
生成excel消耗时间; |
|
BBBB | name |
存储磁盘名称; |
size(GB) |
磁盘容量; |
|
disc attach type |
磁盘类型; |
|
BBBC | hdisknn |
各个磁盘信息、状态以及MOUNT位置; |
BBBD | Adapter_number |
磁盘适配器编号; |
Name |
磁盘适配器名称; |
|
Disks |
磁盘适配器数量; |
|
Description |
磁盘适配器描述; |
|
BBBE | ||
BBBG | ||
BBBL | ||
BBBN | NetworkName |
网络名称; |
MTU |
网络上传送的最大数据包,单位是字节; |
|
Mbits |
带宽; |
|
Name |
名称; |
|
BBBP | vmtune, schedtune, emstat 和 lsattr命令的输出信息; | |
CPUnn | CPU nn |
执行间隔时间列表; |
User% |
显示在用户模式下执行的程序所使用的 CPU 百分比; |
|
Sys% |
显示在内核模式下执行的程序所使用的 CPU 百分比; |
|
Wait% |
显示等待 IO 所花的时间百分比; |
|
Idle% |
显示 CPU 的空闲时间百分比; |
|
CPU% |
CPU总体占用情况; |
|
CPU_ALL | CPU nn |
执行间隔时间列表; |
User% |
显示在用户模式下执行的程序所使用的 CPU 百分比; |
|
Sys% |
显示在内核模式下执行的程序所使用的 CPU 百分比; |
|
Wait% |
显示等待 IO 所花的时间百分比; |
|
Idle% |
显示 CPU 的空闲时间百分比; |
|
CPU% |
CPU总体占用情况; |
|
Logical CPUs (SMT=on) |
||
CPU_SUMM | CPU_SUMM |
CPU编号; |
User% |
显示在用户模式下执行的程序所使用的 CPU 百分比; |
|
Sys% |
显示在内核模式下执行的程序所使用的 CPU 百分比; |
|
Wait% |
显示等待 IO 所花的时间百分比; |
|
Idle% |
显示 CPU 的空闲时间百分比; |
|
DGBUSY | ||
DGREAD | ||
DGSIZE | ||
DGWRITE | ||
DGXFER | ||
DISKBSIZE | Disk Block Size Hostname |
执行间隔时间列表; |
hdisknn |
磁盘传输速度时间间隔采样;(读和写的总趋势图) |
|
DISKBUSY | Disk %Busy Hostname |
执行间隔时间列表; |
hdisknn |
每个磁盘执行采样数据;(磁盘设备的占用百分比) |
|
DISKREAD | Disk Read kb/s Hostname |
执行间隔时间列表; |
hdisknn |
每个磁盘执行采样数据;(磁盘设备的读速率) |
|
DISKWRITE | Disk Write kb/s Hostname |
执行间隔时间列表; |
hdisknn |
每个磁盘执行采样数据;(磁盘设备的写速率) |
|
DISKXFER | Disk transfers per second Hostname |
执行间隔时间列表; |
hdisknn |
每秒钟输出到物理磁盘的传输次数; |
|
DISKSERV | ||
DISK_SUMM | Disk total kb/s Hostname |
执行间隔时间列表; |
Disk Read kb/s |
每个磁盘执行采样数据;(磁盘设备的读速率) |
|
Disk Write kb/s |
每个磁盘执行采样数据;(磁盘设备的写速率) |
|
IO/sec |
每秒钟输出到物理磁盘的传输次数; |
|
EMCBSIZE/FAStBSIZE | ||
EMCBUSY/FAStBUSY | ||
EMCREAD/FAStREAD | ||
EMCWRITE/FAStWRITE | ||
EMCXFER/FAStXFER | ||
EMCSERV/FAStSERV | ||
ESSBSIZE | ||
ESSBUSY | ||
ESSREAD | ||
ESSWRITE | ||
ESSXFER | ||
ESSSERV | ||
FILE | iget |
在监控期间每秒钟到节点查找例行程序的呼叫数 |
namei |
在监控期间每秒钟路径查找例行程序的呼叫数(sar -a ). |
|
dirblk |
在监控期间通过目录搜索例行程序每秒钟扫描到的目录块数 (sar -a) |
|
readch |
在监控期间通过读系统呼叫每秒钟读出的字节数(sar -c) |
|
writech |
在监控期间通过写系统呼叫每秒钟写入的字节数(sar -c) |
|
ttyrawch |
在监控期间通过TTYs每秒钟读入的裸字节数(sar -y ). |
|
ttycanch |
终端输入队列字符 . 对于aix Version 4或者更后的版本这个值总是0 |
|
ttyoutch |
终端输出队列字符. (sar -y ). |
|
FRCA | ||
IOADAPT | Disk Adapter Hostname(KB/s) |
执行间隔时间列表; |
Disk Adapter_read |
磁盘适配器读速率; |
|
Disk Adapter_write |
磁盘适配器写速率; |
|
Disk Adapter_xfer-tps |
磁盘适配器传输速率;(该物理磁盘每秒的 IO 传输请求数量) |
|
JFSFILE | JFS Filespace %Used Hostname |
执行间隔时间列表; |
file system/LV |
文件系统以及mount磁盘设备已使用空间百分比; |
|
JFSINODE | JFS Inode %Used Hostname |
执行间隔时间列表; |
file system/LV |
文件系统以及mount磁盘设备的inode已使用空间百分比; |
|
LARGEPAGE | ||
LPAR | ||
MEM | Memory Hostname |
执行间隔时间列表; |
Real Free % |
实际剩余内存百分比; |
|
Virtual free % |
虚拟剩余内存百分比; |
|
Real free(MB) |
实际剩余内存大小;(MB) |
|
Virtual free(MB) |
虚拟剩余内存大小;(MB) |
|
Real total(MB) |
实际内存总体大小;(MB) |
|
Virtual total(MB) |
虚拟内存总体大小;(MB) |
|
MEMUSE | %numperm |
分配给文件页的实际内存百分比 |
%minperm |
mixperm的缺省值约为20%的物理内存.通常会不断的运行,除非vmtune或rmss命令中使用收集 |
|
%maxperm |
maxperm的缺省值约为80%的物理内存. 通常会不断的运行,除非vmtune或rmss命令中使用收集 |
|
minfree |
空闲页面数的最小值 |
|
maxfree |
空闲页面数的最大值 指定的vmtune命令或系统默认 |
|
%comp |
分配给计算页的内存百分比,NMON分析器计算这个值 计算页是可被 page space支持的,包括存储和程序文本段 他们不包括数据,可执行的和共享的库文件 |
|
MEMNEW | Process% |
分配给用户进程的内存百分比 |
FSCache% |
分配给文件系统缓存的内存百分比 |
|
System% |
系统程序使用的内存百分比 |
|
Free% |
未被分配的内存百分比 |
|
User% |
非系统程序使用的内存百分比 |
|
NET | read/write |
显示系统中每个网络适配器的数据传输速率(千字节/秒) |
NETPACKET | reads/s |
统计每个适配器网络读包的数量 |
writes/s |
统计每个适配器网络写包的数量 |
|
NFS sheets | ||
PAGE | faults |
每秒的page faults数 |
pgin |
每秒钟所读入的页数,包括从文件系统读取的页数 |
|
pgout |
每秒钟所写出的页数,包括写到文件系统的页数 |
|
pgsin |
每秒钟从页面空间所读取的页数 |
|
pgsout |
每秒钟写到页面空间的页数 |
|
reclaims |
从nmon回收这项之前的10个,和vmstat报告的值是一样的,代表了页替换机制释放的pages/sec的数量 |
|
scans |
扫描页替换机制的pages/sec的数量,和vmstat报告的值是一样的,页替换在空闲页数量到达最小值时初始化,在空闲到达最大值时停止 |
|
cycles |
周期 times/sec的数值,页替换机制需要扫描整个页表,来补充空闲列表。这和vmstat报告的cy数值一样,只是vmstat报告的这个值是整形值,而nmon报告的是实型值 |
|
fsin |
分析器计算的数据为pgin-pgsin的图形处理所用 |
|
fsout |
分析器计算的数据为pgout-pgsout的图形处理所用 |
|
sr/fr |
分析器计算的数据为scans/reclaims的图形处理所用 |
|
PROC | RunQueue |
运行队列中的内核线程平均数(同sar -q中的runq-sz) |
Swap-in |
等待page in的内核线程平均数 (同sar -q中的swpq-sz) |
|
pswitch |
上下文开关个数 (同sar -w中的pswch/s) |
|
syscall |
系统调用总数.(同sar -c中的scall/s) |
|
read |
系统调用中read的数量. (同sar -c中的sread/s) |
|
write |
系统调用中write的数量. (同sar -c中的swrit/s) |
|
fork |
系统调用中fork的数量. (同sar -c中的 fork/s) |
|
exec |
系统调用中exec 的数量. (同sar -c中的 exec/s) |
|
rcvint |
tty接收中断的数量. (同sar -y中的 revin/s) |
|
xmtint |
tty传输中断的数量. (同sar -y中的 xmtin/s) |
|
sem |
IPC信号元的数量 创建,使用和消除). (同sar -m中的 sema/s) |
|
msg |
IPC消息元的数量 (发送和接收). (同sar -m中的 sema/s) |
|
PROCAIO | ||
TOP | PID |
进程号 |
%CPU |
CPU使用的平均数 |
|
%Usr |
显示运行的用户程序所占用的CPU百分比 |
|
%Sys |
显示运行的系统程序所占用的CPU百分比 |
|
Threads |
被使用在这个程序中的线程数 |
|
Size |
对于这个程序一次调用分配给数据段的paging space平均值 |
|
ResText |
对于这个程序一次调用分配给代码段的内存平均值 |
|
ResData |
对于这个程序一次调用分配给数据段的内存平均值 |
|
CharIO |
通过读写系统调用的每秒字节数 |
|
%RAM |
此命令所使用的内存百分比 ((ResText + ResData) / Real Mem) |
|
Paging |
此进程所有page faults的总数 |
|
Command |
命令名称 |
|
WLMClass |
此程序已分配的 Workload Manager superclass名称 |
|
IntervalCPU |
详细信息中显示在时间间隔中所有调用命令所使用的CPU总数 |
|
WSet |
详细信息中显示在时间间隔中所有调用命令所使用的内存总数 |
|
User |
运行进程的用户名 |
|
Arg |
包含完整的参数字符串输入命令 |
|
UARG | ||
WLM sheets | ||
ZZZZ | ||
nmon关键指标列表
关键指标类型 | 关键指标名称 |
关键指标含义 |
SYS_SUMM | CPU% |
cpu占有率变化情况; |
IO/sec |
IO的变化情况; |
|
AAA | AIX |
AIX版本号; |
cpus |
CPU数量; |
|
hardware |
被测主机处理器技术; |
|
host |
被测主机名; |
|
interval |
监控取样间隔;(秒) |
|
kernel |
被测主机内核信息; |
|
CPU_ALL | User% |
显示在用户模式下执行的程序所使用的 CPU 百分比; |
Sys% |
显示在内核模式下执行的程序所使用的 CPU 百分比; |
|
Wait% |
显示等待 IO 所花的时间百分比; |
|
Idle% |
显示 CPU 的空闲时间百分比; |
|
CPU% |
CPU总体占用情况; |
|
DISKBUSY | Disk %Busy Hostname |
执行间隔时间列表; |
hdisknn |
每个磁盘执行采样数据;(磁盘设备的占用百分比) |
|
DISK_SUMM | Disk total kb/s Hostname |
执行间隔时间列表; |
Disk Read kb/s |
每个磁盘执行采样数据;(磁盘设备的读速率) |
|
Disk Write kb/s |
每个磁盘执行采样数据;(磁盘设备的写速率) |
|
IO/sec |
每秒钟输出到物理磁盘的传输次数; |
|
NET | read/write |
本sheet显示系统中每个网络适配器的数据传输速率(千字节/秒) |
JFSFILE | JFS Filespace %Used Hostname |
执行间隔时间列表; |
file system/LV |
文件系统以及mount磁盘设备已使用空间百分比; |
|
JFSINODE | JFS Inode %Used Hostname |
执行间隔时间列表; |
file system/LV |
文件系统以及mount磁盘设备的inode已使用空间百分比; |
|
MEM | Memory Hostname |
执行间隔时间列表; |
Real Free % |
实际剩余内存百分比; |
|
Virtual free % |
虚拟剩余内存百分比; |
|
Real free(MB) |
实际剩余内存大小;(MB) |
|
Virtual free(MB) |
虚拟剩余内存大小;(MB) |
|
Real total(MB) |
实际内存总体大小;(MB) |
|
Virtual total(MB) |
虚拟内存总体大小;(MB) |
|
PAGE | faults |
每秒的page faults(页错误)数; |
pgin |
每秒钟所读入的页数,包括从文件系统读取的页数 |
|
pgout |
每秒钟所写出的页数,包括写到文件系统的页数 |
|
pgsin |
每秒钟从页面空间所读取的页数 |
|
pgsout |
每秒钟写到页面空间的页数 |
|
reclaims |
从nmon回收这项之前的10个,和vmstat报告的值是一样的,代表了页替换机制释放的pages/sec的数量 |
|
scans |
扫描页替换机制的pages/sec的数量,和vmstat报告的值是一样的,页替换在空闲页数量到达最小值时初始化,在空闲到达最大值时停止 |
|
cycles |
周期 times/sec的数值,页替换机制需要扫描整个页表,来补充空闲列表。这和vmstat报告的cy数值一样,只是vmstat报告的这个值是整形值,而nmon报告的是实型值 |
|
fsin |
分析器计算的数据为pgin-pgsin的图形处理所用 |
|
fsout |
分析器计算的数据为pgout-pgsout的图形处理所用 |
|
sr/fr |
分析器计算的数据为scans/reclaims的图形处理所用 |