First, let me show you some pictures to understand
Without further ado, let’s look at the solutions below! ! !
1. The memory module is loose or the gold finger is oxidized.
1. First remove the memory module.
2. Use a dry cloth or eraser to wipe the gold finger part of the removed memory module.
3. After wiping is completed, reinsert the memory module into the memory slot and restart the computer again.
2. BIOS error
1. First, we remove the button battery from the motherboard and leave it for a few minutes.
2. Wait for the placement to end and install the button battery in its original position to restore the BIOS initial values.
3. After restarting the computer, observe whether the computer starts normally.
3. Too much dust
1. Too much dust accumulates and increases the temperature of the hardware, which will affect the life of the hardware.
2. To clean the dust, we can use a brush or a high-power hair dryer to clean the dust.
4. The motherboard power supply is faulty
1. If the above three methods do not solve the problem, you can take the computer to a computer store for repair.
2. If the hardware is covered by the warranty, you can contact after-sales service. If it is not within the warranty period, you can only replace it yourself.
5. Some suggestions for you: Try not to place your computer in a cool, humid place. It is easy for the computer to fail to turn on, which is a headache for novices. If you come across a solution, here are the solutions:
Drying the motherboard under a drying lamp is the best way. Use a hair dryer to blow evenly back and forth. If you blow it to one place for too long, it will become a heat gun and blow down both the north and south bridges. It’s also good to bask in the sun.
If it is helpful to you, please move your little hands and give it a thumbs up! ! !