Yuxian: CSDN content partner, CSDN new star mentor, full-stack creative star creator, 51CTO (Top celebrity + expert blogger), github open source enthusiast (go-zero source code secondary development, game back-end architecture https: https://github.com/Peakchen)
The delay spread of multimode fiber refers to the delay difference caused by different propagation path lengths of photons in different modes when optical signals are transmitted in multimode fiber. This delay difference can cause signal distortion and phase distortion, affecting the performance of fiber optic communication systems. To solve this problem, the delay spread of multimode fiber needs to be calculated and compensated.
Principle explanation:
The delay spread of multimode fiber is mainly affected by two factors: inter-mode dispersion and inter-mode gap. Intermodal dispersion is caused by different modes of photons propagating at different speeds in the fiber. The intermodal gap is due to the different propagation path lengths of the different modes. These two factors work together to cause delay differences in optical signals in multimode fibers.
Flow chart of underlying architecture:
When calculating the delay spread of multimode fiber, the following steps can be used:
- Determine the parameters of the fiber, such as refractive index difference, fiber length, etc.
- Calculation of the propagation constants for the different modes can be done numerically or analytically.
- The propagation time of each mode is calculated according to the propagation constant.
- Computes the difference in delay between modes based on propagation time.
Explanation of usage scenarios:
The delay spread of multimode fiber is very important for high-speed optical communication systems. In optical fiber communication systems, high-speed data signals need to be transmitted through optical fibers, and multimode dispersion in optical fibers will cause delay differences between different modes, thereby affecting the phase and time domain characteristics of the signal. In order to maintain the integrity and accuracy of the signal, the delay spread of multimode fiber needs to be calculated and compensated. This is in high-speed data transmission, fiber optic sensing and