The nitrogen gas cabinet is used to store electronic components, chips, semiconductor devices, metal materials, circuit boards, precision instruments and other items. By filling nitrogen gas to reduce the humidity in the cabinet, it can achieve moisture-proof, anti-oxidation, anti-static, anti-rust and anti-corrosion. Mildew effect.
Parameters of six-door nitrogen cabinet
1. Volume: about 1380L; outer dimension: W1200*D700*H1840mm; 10 anti-static laminates with six-door design.
2. Cabinet material: the cabinet body is made of high steel 1.2mm thick steel material, the surface of the cabinet body is made of anti-static baking varnish high-strength structure cabinet body, high-load steel laminates, good airtightness, and the visible window of the cabinet door is tempered with 4mm Glass, using the pressing installation method to make the glass and steel door frame perfectly combined, with strong airtightness.
3. Electrostatic design: Anti-static paint (surface resistance is 105~109 ohms), and a ground wire and a static-conductive brake wheel are directly connected to the ground to avoid static electricity generated by low humidity and better protect electronic components.
4. Cabinet design: The total design of the nitrogen cabinet is 5 layers. Each layer can be adjusted freely. The air flow is evenly distributed by punching holes in the layer. The flow meter is embedded in the bookend in the middle of the cabinet for easy adjustment. The air inlet is located on the top of the cabinet.
5. Humidity range: 1%-60%RH can be set, display accuracy ±3%RH, temperature display accuracy ±1 degree.
6. Rated voltage: 220V, power 8W, rated frequency 50Hz~60Hz.
7. Display mode: microcomputer digital LED display, temperature, humidity and oxygen content display, and reset button to return to zero operation function; humidity display range 1%~99.9% RH, temperature display range 0°C~95°C.
8. Oxygen digital display: the oxygen content is displayed as 0-25%, which cannot be set.
9. Humidity alarm: The alarm function of humidity exceeding the standard can be upgraded.
10. Environmental protection design: low energy design, no noise.
11. Upgrade port: The on-site software upgrade port is reserved, and technical upgrades can be performed free of charge without disassembling the panel.
12. Intelligent dormancy: Built-in intelligent dormancy technology makes the device more energy-efficient and more stable.
13. Intelligent nitrogen filling: install an intelligent nitrogen filling system. When the humidity reaches the set value, the nitrogen filling system will automatically stop nitrogen filling, which is conducive to rapid dehumidification and prevention of oxidation of semiconductors and other devices, and can effectively save nitrogen .
14. Calibration function: Imported digital temperature and humidity sensors are adopted, with higher accuracy and reliability, and no calibration within ten years.
15. Network monitoring: Ethernet RJ485 interface is added to the control panel for network monitoring, and the temperature, humidity and oxygen content data on the nitrogen cabinet can be read in real time, which is convenient for observing the stability of the equipment.
Nitrogen cabinets play an important role in intelligent monitoring, intelligent control and intelligent diagnosis. In addition to six-door nitrogen cabinets, intelligent material storage cabinets, electronic drying cabinets, stainless steel nitrogen cabinets, two-door/four-door nitrogen cabinets, networked nitrogen cabinets, Electronic moisture-proof cabinets and smart touch-screen moisture-proof cabinets are upgraded to three displays on the basis of the original temperature and humidity dual displays, real-time display of temperature, humidity, and oxygen concentration, powerful access and management functions, and provide users with high-quality products and services.