Article directory
1. Introduce the problem
I turned on the computer today and found C盘
that it became popular, as shown in the picture below:
At this point, I knew I needed to expand.
2. Disk partition
On C盘
the premise of capacity expansion, we need to find other disks with more free space, and then split them into unpartitioned disks.
The unpartitioned disk is the user to increase C盘
the size of the space.
I 磁盘D
have since done disk splitting as shown in the steps below.
- Right click on
此电脑
the mouse, open management
Or, Windows键+ R
press the shortcut key to open the running interface, enter compmgmt.msc
the command, and press 确定
to open the computer management, as shown in the figure below:
- In the management interface, click Disk Management and find
D盘
, as shown in the figure below:
C盘
[Remarks] You see me 150G
, this is the space after I have expanded, before the expansion is100G
[Remarks] The definition should ensure that your disk to be split and the disk to be expanded are in the same disk.
What does this sentence mean? I need to expandC盘
, and the space for expansion comes fromD盘
. At this point, it needs toC盘
beD盘
on the same disk as in the figure above磁盘 0
, as shown in the figure below:
- Right-
D盘
click on the compressed volume, as shown in the following figure:
- Waiting for query compression space
- Enter the compression amount of the compressed space, which refers to the space size of the new partition after splitting, and click the Compress button.
Its unit is MB
, and our disk unit is GB
, which can be converted as follows: 1GB = 1024MB
.
For example, if I want to split 10GB
the partition, then the compression amount of the compressed space is 10240MB
.
10GB
At this point, an unallocated space appears , as shown in the figure below:
We could have used the extended volume to allocate this unallocated disk to C盘
it.
However, C盘
it is separated from this unallocated disk D盘
.
Therefore, C盘
the extended volume is grayed out and cannot be clicked, as shown in the following figure:
At this time, we need to use a third-party disk expansion tool. There are many such expansion tools on the Internet.
I use it DiskGenius
, its official website address is: https://www.diskgenius.cn
3. Disk expansion
We can integrate non-partitioned disks into it according to the following steps C盘
to achieve C盘
the purpose of capacity expansion.
- Unzip the downloaded file
DiskGenius工具
, double-click to run itDiskGenius.exe
, check the agreement, and click the Agree button, as shown in the figure below:
- right
本地磁盘(C:)
click扩容分区
- Select the previously newly created unallocated
10GB
space and click OK
[Remarks] If yours is not a newly created unallocated space, but an existing disk, there may be data on this disk, and you need to back it up to avoid data loss.
- Adjust the partition capacity, the default is fine, and then click Start
You can choose to shut down, restart, etc. after the check is complete.
- The software will prompt the operation and precautions to be done. After confirming that there is no problem, click
是
the button
- Just wait for the expansion
4. Precautions for using DiskGenius
Precautions:
-
If you want to split the system partition, the software will automatically start
WinPE版
to complete the adjustment work. After the adjustment is completed, the computer will restart and returnWindows系统
. If the computer system cannot be restarted directlyWinPE版
, it can be createdU盘启动盘
, and thenPE环境
the partition expansion operation can be performed after entering. -
During the process of partition adjustment by software, do not use other software to read and write to the partition, so as not to affect the operation.
-
When there is some kind of error in the hard disk or partition, such as disk bad track or other potential logical errors, you should solve the problem first, and then adjust the partition.
-
Please ensure that the power supply is normal during the partition expansion process, and do not shut down forcibly.