The fall detection and recognition early warning system for nursing home personnel uses yolov5+python network model technology and the nursing home personnel fall detection and recognition early warning algorithm to identify and analyze fall events. When a person falls is detected, an alarm will be automatically issued to remind relevant personnel to take timely measures. YOLOv5 is a single-stage target detection algorithm. Based on YOLOv4, this algorithm has added some new improvement ideas, so that its speed and accuracy have been greatly improved. The YOLOv5 algorithm has four versions, including: YOLOv5s, YOLOv5m, YOLOv5l, and YOLOv5x. This article focuses on YOLOv5s, and other versions deepen and widen the network on the basis of this version.
- Input - The input represents the input image. The input image size of the network is 608*608, and this stage usually includes an image preprocessing stage, which is to scale the input image to the input size of the network, and perform operations such as normalization. In the network training phase, YOLOv5 uses Mosaic data enhancement operations to improve the training speed of the model and the accuracy of the network; and proposes an adaptive anchor frame calculation and adaptive image scaling method.
- Benchmark network - The benchmark network is usually a network of classifiers with excellent performance, and this module is used to extract some general feature representations. Not only the CSPDarknet53 structure is used in YOLOv5, but also the Focus structure is used as the benchmark network.
- Neck network -Neck network is usually located in the middle of the benchmark network and the head network, and it can further improve the diversity and robustness of features. Although YOLOv5 also uses the SPP module and the FPN+PAN module, the implementation details are somewhat different.
- Head output terminal - Head is used to complete the output of target detection results. For different detection algorithms, the number of branches at the output end is different, usually including a classification branch and a regression branch. YOLOv4 uses GIOU_Loss to replace the Smooth L1 Loss function, thereby further improving the detection accuracy of the algorithm.
In YOLOv5, the Mosaic data enhancement method is still used in the training model stage, which is improved on the basis of the CutMix data enhancement method. CutMix only uses two images for splicing, while the Mosaic data enhancement method uses four images, which are spliced according to random scaling, random cropping, and random arrangement. The specific effect is shown in the figure below. This enhancement method can combine several pictures into one, which not only enriches the data set, but also greatly improves the training speed of the network, and reduces the memory requirements of the model.
The Adapter interface defines the following methods:
public abstract void registerDataSetObserver (DataSetObserver observer)
Adapter represents a data source. This data source may change, such as adding data, deleting data, and modifying data. When the data changes, it must notify the corresponding AdapterView to make corresponding changes. In order to realize this function, the Adapter uses the observer mode. The Adapter itself is equivalent to the observed object, and the AdapterView is equivalent to the observer. Register the observer for the Adapter by calling the registerDataSetObserver method.
public abstract void unregisterDataSetObserver (DataSetObserver observer)
Unregister the observer by calling the unregisterDataSetObserver method.
public abstract int getCount () returns the number of data in the Adapter.
public abstract Object getItem (int position)
The data in the Adapter is similar to an array, and each item in it corresponds to a piece of data, and each piece of data has an index position, that is, position, and the corresponding data item in the Adapter can be obtained according to the position.
public abstract long getItemId (int position)
Get the id of the specified position data item, usually the position will be used as the id. In Adapter, relatively speaking, position is used more frequently than id.
public abstract boolean hasStableIds ()
hasStableIds indicates whether the id of the original data item will change when the data source changes. If it returns true, it means the Id remains unchanged, and if it returns false, it means it may change. The hasStableIds method of Adapter subclasses (including direct subclasses and indirect subclasses) provided by Android all return false.
public abstract View getView (int position, View convertView, ViewGroup parent)
getView is a very important method in Adapter, which will create corresponding UI items for AdapterView according to the index of the data item.