Features
32-bit RISC core, running frequency 240M
Support dsp instruction set and fpu floating point unit
FFT accelerator: supports up to 1024 points of complex FFT/IFFT operations, or 2048 points of real FFT/IFFT operations
Built-in high-speed SRAM, built-in 2MB flash memory Built-in 2.4W, mono class AB power amplifier
Support 1-way electret microphone
Support L2S input/output.
Support 5V power input
Built-in 5V to 3.3V, 3.3V external load does not exceed 150 MA
RC 12 MHz clock source and PLL phase-locked loop clock source
Built-in POR (reset power), low voltage detection and watchdog
All GPIOs can be configured as external interrupt inputs and wake-up sources
1 standard SPI master interface, the highest rate is 30 MHZ1 SPI slave interface, the highest rate is 30 MHz
1 full-duplex UART with a maximum rate of 3 Mbps and a serial port voltage of 3.3V
1 12C master/slave controller with a maximum rate of 400KHZ
2 PWM outputs
1 12-bit SAR-ADC with a maximum sampling rate of 450 khz
how to burn