How to retrieve the password of the Uniview camera if you forget it (detailed retrieval steps)

How to retrieve the password of the Uniview camera if you forget it (detailed retrieval steps)

If the IPC camera password is forgotten, the operation steps are as follows:

1. Try to see if you can log in normally with the default password, the user name is admin, and the default password is admin or 123456.
2. Confirm whether the IPC has been added to the upper-level VM platform and is online. If so, the industry and general IPC can be modified and retrieved from the platform side, and the distribution IPC is not supported.

Retrieval method: platform --- [configuration] --- [device management] --- [network camera] path, re-enter the new password on the add camera interface (delete the previous password), no need to restart the camera. The platform must have a strong password, three combinations of uppercase and lowercase letters + numbers.

If none of the above two methods work, click Forgot Password to view the corresponding prompt at the login site of the user name and password on the web interface of the browser.

 If none of the above two methods work, click Forgot Password to view the corresponding prompt at the login site of the user name and password on the web interface of the browser.

 pop-up interface 1

pop-up interface 2

 

 

1. Prompt interface 1 temporary password, check if there is a hard reset button on the IPC itself, if yes, you can restore the factory default password, if not, you need to dismantle the device and return it to the repair station to flash it back.
2. Prompt interface 2 security code method, use WeChat to scan the QR code, and reserve a mobile phone number to receive the security code. If the mobile phone number is not used before and needs to be changed, after scanning the QR code on WeChat, you can click "Send to other mobile phones", Then enter the current mobile phone number and upload the front photo of the ID card. The backend will complete the review within one working day. After the review, the mobile phone will receive a prompt for a security code, which can be filled in on the IPC interface to modify the password.