Chapter 2 Data Loading
1. Load well data
Idea: The loading of well data is mainly divided into three parts: loading of well location, loading of logging curve, and loading of layered data. The focus is on editing the format file.
1. Loading of well position
(1) Edit the well location file: well.dat
well name x y depth
-
-
- Enter well location:
-
Command Menu—Data—Import—ASCII Well Loader
①Input file name: file:home/ow2003/well.dat (Figure 1)
figure 1
(2) Edit format file
ASCII Loader ——edit—format(图1)
ASCII format edit—— format—new(图2)
Enter the directory and file name of the well file home/ow2003/well.dat in the data file, enter the directory and file name/aa.wdl of the format file in the format file, and then OK (Figure 3), and the data will appear well.dat window ( Figure 5 ).
figure 2
image 3
Select the well header in the Data Category of the ASCII format edit window ( Figure 4 ) , and select in the Data Items
Uwi—Read From File ( Figure 3 ) ——Wiping well list—Add ( Figure 5 )
command well name—Read From File—Common well name column—Add
Orig x or lon sf—Read From File—抹x列—Add
Orig y or lon sf—Read From File—抹y列—Add
Total depth—Read From File—wiping well depth column—Add
Elev Type—constant—Value:KB—Add
Elevation—constant—Value:0——Add
Save format—give the format file name: aa.wdl
Save as ---- input file name
Test format
Exit
Figure 4
Figure 5
(3) Load well location data
ASCII Loader——file—load ( Figure 1 ) , display the loading process, and the loading is completed.
-
- Loading of well logs
Idea: Well logging curves have data in many different formats, the commonly used ones are LAS format and ASCII format. Among them, loading in LAS format is relatively simple. This article will take the ASCII format as an example, and pay attention to the editing of the format file during learning.
(1) Edit the log data file: t163.dat
Among them, aa, bb, and cc are added for the convenience of defining the format.
Figure 6
(2) Edit format file
①OW——Data——Import——Curve Loader——Input Data File: /home/ow2003/t163.dat
Figure 7
②Curve Loader——Edit——ASCII Format——Format——New——the pop-up window CurveFormat Edit: New (Figure 9)
Figure 8
Figure 9
CurveFormat Edit:New——New Format:tuocurve.all
Select File:/home/ow2003/t163.dat
Ok
The Data Previewer pops up (Figure 10)
Curve Format Edit(图8)——Format prarmeter:Recorder ID Type——Modify
Pop up Curve Format Edit: Recorder ID Type lights up Marker (Figure 11)
Wipe aa in the Data Previewer window: (Figure 12)
OK
Figure 10
Figure 11
Figure 12
Curve Format Edit(图8)——Format prarmeter:Well Delimiter——Modify
Pop up Curve Format Edit: Well Delimiter lights up Beginning of well marker (Figure 11)
Wipe aa in the Data Previewer window: (Figure 12)
OK
Curve Format Edit(图8)——Format prarmeter:Curve Delimiter——Modify
Pop up Curve Format Edit: Curve Delimiter lights up the Beginning of Curve marker (Figure 11)
Wipe bb in the Data Previewer window: (Figure 12)
OK
The above is the editing of the parameters defined by the logging curve format, and the editing of the parameters of the data will be carried out below.
Curve Format Edit(图8)——Data Fields——Edit
Pop up Curve Format Edit: Edit Fields (Figure 13)
(Figure 13)
Curve Format Edit:Edit Fields——Field Name:Common Well Name
Wipe t163 in the Data Previewer window——Add
Curve Format Edit:Edit Fields——Field Name:Unique Well ID
Wipe t163 in the Data Previewer window——Add
Curve Format Edit:Edit Fields——Field Name:Sample interval
Wipe 0.125 in the Data Previewer window - Add
Curve Format Edit:Edit Fields——Field Name:curve name
Wipe CALI in the Data Previewer window - Add
Curve Format Edit:Edit Fields——Field Name:Depth of Measure
Wipe 2497.0000 in the Data Previewer window - Add
Curve Format Edit:Edit Fields——Field Name:curve Value
Wipe 11.7063 in the Data Previewer window - Add
Curve Format Edit:Edit Fields——Field Name:curve name
Wipe DT in the Data Previewer window——Add
Curve Format Edit:Edit Fields——Field Name:curve Value
Wipe 84.5900 in the Data Previewer window - Add
Do the same operation for the following GR, R4, and SP curves in turn.
(3) Load logging data
In CurveFormat Edit: tuocurve.all - Format - Save (Need) (Figure 8)
在OpenWorks Curve Loader:SHENGCAI ——Format File:tuocurve.all
OpenWorks Curve Loader:SHENGCAI ——File——Scan
OpenWorks Curve Loader: The scan information will appear below the SHENGCAI window (Figure 14).
OpenWorks Curve Loader: SHENGCAI——File——Load All curve loading is complete.
Figure 14
(4) Check the loaded logging curve
Data——Management——Well Curve Viewer ( Figure ) Pop up Well Curve Viewer: SHENGCAI window ( Figure )——OK
Well Curve Viewer:SHENGCAI——File——Read All——Wells:t163
Curve Names:GR
Curve will show the GR curve of T163 well.
-
- Hierarchical Data Loading
Idea: The idea of loading layered data is very similar to that of well location data, with the emphasis on editing format data.
-
-
- Editing of Hierarchical Data
-
The format of layered data is divided into three columns: well name, layer name, and layer depth. (Figure 15)
Figure 15
-
-
- edit format file
-
OW——Data——Import——ASCII Loader——Input Data File: /home/ow2003/aatop.dat(图7)
ASCII Loader: SHENGCAI——Edit——Format pop-up window ASCII Format Edit: tuopick.wdl (Figure 16)
Format——new popup (Figure 17)
Data File——Selection:/home/ow2003/aatop.dat
Format File——Selection:/home/ow2003/tuopick.wdl
OK pops up the Data Previewer (Figure 18)
Figure 17
Figure 18
在ASCII Format Edit:tuopick.wdl——Data Categories:Options
Data Items:Line Per Record
Source:constant
Value:1
Add 。
在Data Categories:Well Header
Data Item:Common Well Name
Wipe t6-1 in Data Previewer
Add
在Data Categories:Well Header
Data Item:Uwi,R
Wipe t6-1 in Data Previewer
Add
在Data Categories:pick
Data Item:Interpreter
Source:constant
Value:liuyg
Add
在Data Categories:pick
Data Item:Pick Name
Source:Read Fm File
Wipe ES2X8
Add
在Data Categories:pick
Data Item: Pick Obs NO (explain scheme)
Source:constant
Value:1
Add
在Data Categories:pick
Data Item:Depth
Source:Read Fm File
wipe 2341
Add
After completion, the effect shown in Figure 19 will appear.
Figure 19
ASCII Format Edit: tuopick.wdl (Figure 19) - test pops up the test window (Figure 20)
Figure 20 Figure 21
Test ——Start
Data Previewer window data will be scanned for errors.
Stop-Close
ASCII Format Edit:tuopick.wdl(January 19)——Save
-
-
- load hierarchical data
-
ASCII Loader :SHENGCAI——Input File: /home/ow2003/aatop.dat
Format :/home/ow2003/tuopick.wdl (Figure 22)
ASCII Loader :SHENGCAI——File——Load
Loading completed