Beijing Mobile CM311-5s-ZG_GK6323V100C_2+8_Free disassembly one-key card brush firmware package
Features:
1. It is suitable for flashing the TV box of the corresponding model;
2. Open the market installation and U disk installation apk shielded by the original firmware;
3. Modify dns, common to all three networks;
4. A large number of built-in useless software has been streamlined, the running speed has been improved, and a large amount of storage space has been added;
5. Remove application installation restrictions;
6. Supports various fancy functions such as self-starting at boot, password lock at boot, child app lock, app hiding, auto-entering HDMI when booting;
7. Voice and home page are all normal.
Card swiping steps: (Refer to it for reference, it is not exactly the same)
1. Prepare a single-partition 8GU disk in FAT32 format, which has never been used as a system disk. Note that Skyworth rec chooses a USB disk, and the actual measurement of 8G is the best. Copy the three files emmc, recovery.img, update.zip, and factory_update_param.aml to the root directory, and pay attention to ensure the integrity of the files;
2. Connect the box to the hdmi, network cable, and power line to keep it turned off. Insert the U disk into the usb port near the network port of the box. Press the power switch on the box to power on. At the same time, press the right button of the remote control repeatedly to refresh the machine. The speed should not be too fast or too slow. About 3 times per second, guide the REC in the U disk until the flashing screen is displayed; or try to press the left button to enter the flashing page, shut down immediately, then restart, click the right button, and enter the rec flashing in the U disk to succeed; Supplement: [Some boxes need to be shorted with tweezers, some need to press the reset button, and some can be upgraded through the settings, not all are the same, the specific model is treated differently, most of the boxes of Jingchen chips can be disassembled through Jingchen Short-circuit artifact to get it done]
3. It takes about three minutes to flash the machine. After the completion, the box will automatically restart. The first startup will optimize the system program. Please wait patiently.
Flash firmware:
Link 1: https://pan.baidu.com/s/1qSmtBgSEbKs6ZFm-yCr-XQ
Extraction code: nnw3
Link 2: https://wwt.lanzoux.com/b021zs97i
Extraction code: 509a
Disclaimer: This Android firmware is only for internal testing and technical exchange. Any legal disputes caused by illegal commercial use and commercial conflicts of interest have nothing to do with me, and I am not responsible for it. Please delete it within 24 hours after downloading. Thank you for your cooperation! Flashing is both fun and risky, please choose carefully, all consequences caused by flashing are at your own risk, and I will not be responsible for it!