ATD
dial command. This command is used to set up a talk, data or fax call.
ATH
on-hook command.
ATA
answers the phone.
AT+CEER
extended error reporting. This command gives the reason for disconnecting the call when the last call setup failed.
AT+VTD
provides users with the application of GSM network to send DTMF (Dual Tone Multi Frequency) dual audio. This command is used to define the length of the double tone (default value is 300 ms).
AT+VTS
provides users with the application of GSM network to send DTMF dual tones. This command allows the transmission of dual audio.
ATDL
redials the last phone number.
AT%Dn
Auto-dial when Data Terminal Ready (DTR).
ATS0
automatically answers.
The call from AT+CICB
is poor.
AT+CSNS
single numbering scheme.
AT+VGR
AT+VGT
gain control. This command should be used to adjust the receive gain of the speaker and the transmit gain of the microphone.
AT+CMUT
microphone mute control.
AT+SPEAKER
speaker/microphone selection. This special command is used to select speaker and microphone.
AT+ECHO
echo cancel.
AT+SIDET
Sidetone correction.
AT+VIP
initializes sound parameters.
AT+DUI
dials with additional user information.
AT+HUI
hangs up with additional user information.
AT+RUI
receives additional user information.
3. Network service command
AT+CSQ
signal quality. +CSQ: 17,99
AT+COPS
service provider selection.
AT+COPS?
+COPS: 0,0,"China Mobile"
AT+CREG
network registration. Get the registration status of the phone.
AT+CREG?
+CREG: 0,1
AT+WOPN
reads operator name. NONE
AT+CPOL
priority operator list. NONE transferred from bbs.sendsms.cn
GPRS module AT call control command
Guess you like
Origin http://10.200.1.11:23101/article/api/json?id=327102262&siteId=291194637
Recommended
Ranking