LCD motherboard upgrade burning tool (MStar ISP Utility) v4.4.5.0 Green Free Edition

MStar ISP Utility is an after-sales upgrade software for MS58. This software can help MS58 users to upgrade their equipment. After the download is complete, double-click to open ISP_Tool4.4.5.0.exe, click connect, click the file to select read, select the .bin file, and confirm. Just follow the instructions in the compressed package.
Upgrade preparation:
prepare a computer with a USB port.
Install CDM_Setup.exe and
copy ISP_Tool4.4.5.0.exe to the computer. No installation is required.
A set of programming tools is required, connect the USB port of the computer to the VGA output port of the TV
Prepare the .bin file to be programmed (V8-0MS5801-LF1V021) How
to upgrade the ISP of MS58 movement
Remarks :
When using the VGA port to upgrade online Note: The ones used are:
P4:RXD-IN
P11:TXD-IN
Therefore, a separate VGA cable needs to be made for online upgrade.
The ISP of MS58 movement is made on the upgrade line.
Note : If it cannot be connected, please replace the jumpers P1 and P2 on the upgrade board.
Upgrade steps
Double-click to open ISP_Tool4.4.5.0.exe and
click connect
to prompt "Device Type is MX25L12805D", indicating OK. Otherwise, check whether the wire is connected properly.
Click read, and the following dialog box will pop up:
Click the file to select read, select the .bin file, and confirm.
Click AUTO, the following dialog box appears: select the red prompt part, and finally click RUN to confirm.
The icon indicates successful programming. If it fails, reconnect and try again.
Power off, then power on again.
Check the software version number, whether it is already 021. If so, end.
LCD motherboard upgrade burning tool (MStar ISP Utility) v4.4.5.0 green free version
Download URL http://www.xiazai.com/wins31697#js_active_url