Set up domain service (Http NTLM proxy) in server 2003

Set up domain service (Http NTLM proxy) in server 2003

The operation of building domain services in windows server 2003 X64.

You can refer to Baidu experience: http://www.cnblogs.com/zfanlong1314/archive/2012/03/26/2418258.html

1. First of all, to configure a domain controller in Windows sever 2003, you must be a system administrator, and the system must have a fixed IP. If you are in a local area network, you can set the IP yourself. If you want to provide some services online, you must apply for a wide area network. IP. Now we just teach you how to configure the domain controller, so to do the configuration in the LAN, first configure a fixed IP address for the system - please refer to the Baidu link above for the operation of fixed IP:

   You can refer to the detailed domain service construction URL link as follows:http://jingyan.baidu.com/article/e6c8503c26aaeee54f1a18a9.html。

2. In the start menu run, enter "dcpromo", click OK, as shown below

3. The following interface appears. ——————Then the following rough operations are basically the next step, the default. It will not be introduced in detail here. ——Or please refer to the Baidu link above.

 

Note: You need to set a domain name here.

default:

next step, default

Next, select "Second"

Next, select "Second"

Next, set a password

Next step:

Next, start the installation configuration,

 

It should be noted here: During this process, if there is a system CD file in the computer, it will be automatically installed and installed. If it is a package downloaded by yourself (such as an ISO image), you can choose to connect to the installed image in the virtual machine settings. .

The operation of selecting the installed virtual machine image is as follows: (PS: This step can be completed before the construction, so that you do not need to reconfigure it later)

1. After the virtual machine is turned on in the VM, there is an operation to connect the ISO file under the host of server 2003.

2. Right-click settings

3. In the virtual machine settings, select the image of the virtual machine, and tick the "connect at startup" in the device status.

 

 

4. The operation of creating a user;

http://jingyan.baidu.com/article/6b182309b91aadba58e1593f.html

5. Add domain service users in the proxy tool

Account management, check "Domain User Authentication", click "Domain", and add the newly created user.

For example: add the created test user and click OK.

6. Verify that the domain service proxy is successful. - Use IE proxy to verify.

Open IE browser, enter a: https URL in the URL bar, as shown below

Select "Settings" - "Internet Options"

Connections - LAN Settings

The settings are as follows: IP + port of the proxy server

 

After setting, click OK, apply, and then visit the webpage again to see if the access is successful. If the access is successful, it means that the proxy server is successfully built.

You can check whether there is connection information or records in the proxy server——

Turn on monitoring - you can see the connection information using the agent.