http://www.cnblogs.com/yangfengwu/p/8887933.html
Information link
Link: https://pan.baidu.com/s/1968t2QITuxoyXlE_NzGvdA Password: yj7w
After the first version of the test was done on my own development board, I made some adjustments
The first DIP switch is the two serial communication between CH340 and Air202
The second DIP switch is the communication between the microcontroller and the serial port 1 of CH340 and Air202
The third DIP switch is the communication between the WIFI module and CH340, 51 microcontroller
The last one of the DIP switch is not connected, it is to allow free pins for communication to prevent serial
Although the MQTT I used at the beginning of the day directly connected to my server and then communicated with my mobile phone, but I did not have any extra mobile phone cards, so I did not demonstrate direct remote communication first. I dare not use the mobile phone card I am using now, Because the SIM900A broke my mobile phone card a long time ago. . Waiting for my classmate to come back and use the data card he bought, now download the first program
Open the downloaded software
I am also learning to sell. . . Problem solving. .
Take a look at what the tutorial says
I use LUA to develop first, because it is flexible enough and simple enough
Actually now I want to know
Different lod, what is the difference, which one should I download. . . .
I'll look for it (I saw it before and forgot where it was)
Looking for a long time, suddenly. .
see you can click
Finished my little thought. .
After reading so much, it feels like downloading lod first and then if you write the corresponding program yourself, you need to call the corresponding lib
If you are not familiar with it for the first time, try it with the official source code first.
Just want to print something
Look at several source code. .
Just found this a good start
DIP switch
The first is to download the lod
It feels like you can choose any one, because we are just printing things on the timer, which one you choose doesn't matter.
I'll power it back on
then plug in
Power-on
This place prints things is powered on
. . Also libs are needed, but right now I don't know which ones are needed either. . .
Take a look at the source code
It seems that these two need
ok, i power it back on
missing something
Still missing. . .
。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。
。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。
。。。。终于好了。。。。。
程序下一篇再唠叨,该睡觉了。。。