I started to mine ETH in January this year. When I first entered the pit, the boss of the Taobao store who sold the mining machine motherboard sent me a Changsha miner with a 9.8 kernel with a hidden button (I didn’t know it at the time), and then I learned about it. Paladins, digital miners and other mining software, and later learned that these software are actually anti-pumping shells added to Claymore's mining software, intercepting the original pumping to their wallets, all have Not less than the original or even a larger proportion of the pumping. I am a person who likes to toss, so I searched wildly on the Internet. If Baidu didn't work, I just googled it. Finally, I found the original software.
Another feature of mine is that I like to use the latest version of the software. I have always believed that the new version of the software must be better than the old version in terms of performance. You think, the author makes a profit by pumping water. If the efficiency of the new version is not as good as that of the old version, what is the author doing to develop the new version, isn't it worth the loss?
My mining machine graphics card configuration is more complicated, it is Radium Wind Magnesium 564D*2+XFX Hynix 574*2+Sapphire Elpida 574*1+Sapphire Hynix 578*2, in V9.8, the local computing power is stable In 183+, V11.0 was released later. As the author said, the computing power increased by 2 to 185+. Later, from V11.4, due to the further improvement of the software by the author, the computing power reached 187+ . But there is a problem. My machine can't run the version above V11.4 stably. It can run stably below V11, including V11. Once running V11.4 and above, it will run for 2 hours or even less than 1 hour. There will be a graphics card whose computing power drops to 0, and mining will exit. Check the running log of the miner. Except for the prompt that a graphics card is suspended (GPU0 hangs) and mining restarts, there is no other information. The content of the error, Google has tried many times to solve the solution that the graphics card is suspended, but it has been fruitless, so I have to stay on V11 all the time.
It went on like this for a few days, and I finally accidentally remembered whether it was caused by the overclocking of the graphics card (because there was no overclocking error log in the log, so I didn't think it was an overclocking problem), so I lowered the number 0 card that hung up from 1975. In 1950, I re-flashed the BIOS, and it was done. Running V11.4, V11.5 or V11.6 no longer had any problems. After the frequency reduction, the computing power of this card will be about 0.3-0.4.
Miners, if your mining machine is always having problems, no matter what version, you might as well carefully check the running log (if it is not the original mining software, there is no complete running log), find out the graphics card with the problem, Then try to reduce the frequency appropriately, maybe it will be done.
The following is the original download link abroad and the original conscience miner pumping interception program:
MEGA: https://mega.nz/#F!O4YA2JgD!n2b4iSHQDruEsYUvTQP5_w
Domestic network disk:
Link: https://pan.baidu.com/s/1dG1NuTz Password: gl63
The conscientious miner only intercepts the original pumping, and returns 50% of the intercepted pumping to the miners themselves, which increases the computing power by 0.5% compared with the original and 3-5% higher than other miners. There is no second pumping. Miners are welcome to grab the package test. See my other article for packet capture: http://blog.csdn.net/lungym/article/details/79380946
Conscience Miner Profile:
This interception program can be used for all versions of Claymore's original. The parameter settings have been commented in Chinese, and you can set them according to the prompts.
1. Unzip all files to Claymore's directory, and modify "single mining.bat" or "dual mining.bat" and wallets and mining pools in epools.txt.
2. After setting, double-click "single mining.bat" or "double mining.bat" to start mining happily. The pumping ratio of this software is 0.5%, but it only intercepts the original pumping and redirects it, and does not pump water twice. It is not like other software that intercepts the pumping and pumps it twice, so the overall calculation is higher than other domestic mining software. If the force is 3--5%, a significant gap will be found in this continuous operation for more than 48 hours. Mining software such as Xsha, Xishi, and Xzi use Kramer as the kernel and then add a reverse pump to their own wallets.
The interception redirection to your wallet can be seen in the NoDevFe.log log.
The network capture found that the
software pumping ratio is indeed 0.5%, which is consistent with the author's description, and should be regarded as a conscientious software.
The first interception: 15 minutes to 17 minutes after the software is started, the software intercepts the original rake to the author's wallet;
the second interception: 1 hour after the first interception, the software intercepts the original rake to your own wallet, to The empty miner name appears in the mining pool revenue list;
the third interception: 1 hour after the second interception, the software intercepts the original version of the pump to the author's wallet;
the fourth interception: 1 hour after the third interception, the software intercepts The original rake will be sent to your own wallet, and it will appear in the mining pool income list with the name of the empty miner;
the fifth interception: 1 hour after the fourth interception, the software intercepts the original rake to the author's wallet;
the sixth interception: distance The fifth interception for 1 hour, the software intercepts the original pumping into your own wallet, and appears in the mining pool income list with the empty miner name;
......