When installing the switch socket, check the authenticity of the product. Whether the accessories of the switch socket are complete must ensure that the metal expansion bolts, plastic expansion pipes, and galvanized screws are complete. There are various brands of switch sockets on the market. It is necessary to know more about a few brands to make a comparison. It is the best to choose a switch socket that suits your own decoration style. There are various types of switches, from pull-wire type to induction type, and different types of switches can be selected for different electrical needs. When purchasing switches and sockets, first roughly calculate how many switches and sockets are needed for decoration. It is best to install more switches and sockets in the living room and bedroom. It is better to install more switches and sockets at home, not too few, not too many. Design yourself first A good location will do.
![]()
Beilein Xiaobian recommends that the general sockets are installed at 0.3m above the ground, and the split air conditioner should be reserved at 1.8m above the ground. For televisions and other electrical appliances, sometimes more than one socket is required, and several sockets may be side by side. arrangement. The switch socket is installed after the wall is decorated. There should be a lot of dust and impurities at the bottom of the box. When installing, the bottom of the box should be cleaned first. The editor of Beilein reminds that the switch and socket should be checked and accepted in time after the installation is completed.
Beilein Xiaobian recommends that the general sockets are installed at 0.3m above the ground, and the split air conditioner should be reserved at 1.8m above the ground. For televisions and other electrical appliances, sometimes more than one socket is required, and several sockets may be side by side. arrangement. The switch socket is installed after the wall is decorated. There should be a lot of dust and impurities at the bottom of the box. When installing, the bottom of the box should be cleaned first. The editor of Beilein reminds that the switch and socket should be checked and accepted in time after the installation is completed.