Nuvoton nuc980 eth2p board
getting started record. Get this board and
download his ubuntu virtual machine, which has a set development environment and buildroot source code. To
use the source code provided by it, you need to delete linux-master and u-boot-master, Then compile, it will automatically download the latest
image file compiled by linux and u-boot and burn it to the board. It
can be run.
When making menuconfig in buildroot,
select the yaffs file system, and the rootfs.yaffs file system image will be automatically compiled. The
jffs2 file system should be for nor flash.
Using the configuration of nuc980_iot, there will be a partition for spi nandflash.
The lighthttpd of eth2p is not very clear.I still made a partition in spi nandflash, and I don't know what it means.
Focus on the document
NUC980_Linux-4.4_BSP_v1.03.000\Documents
NUC980 Linux 4.4 BSP User Manual CHT.pdf
UM_NUC980_NUC970_Linux_environment_on_VMware_EN_Rev1.00.pdf
UM_NuMaker_NUC980_Serial_Server_EN_Rev1.20.pdf
Focus on this place and delete u-linux-master. Then compile, it will automatically download the latest linux and u-boot to
organize a useful few months, re-read, can also understand the unambiguous documents.
Useless information must be resolutely deleted.