Previously, BoTanXia has posted some tutorial articles that taught you how to create " shortcut instructions " tools! Although the creation process may be a bit convoluted, it is a bit complicated! But you can really understand the convenience and plasticity of shortcut commands .
Check out the beginner's tutorial at the end of the article.
of course! This depends on whether you are not interested, the commands created by yourself are still more fun than the one-click acquisition, and there is a lot of sense of accomplishment! Let 's talk about the world still based on " hands-on creation ", let's push you some convenient and fun things.
Access card instructions
We all know that the current Android phones are equipped with NFC chips, and they all have the function of swiping the entry banned card information! On the iPhone side, there is an NFC chip, but there is no functional port for accessing card information. So how do we achieve it?
Automation is about to be used at this time! First of all, of course, add an operation. Click Create Personal Automation under Automation, and drop down to find "NFC" in the settings! Click in, and we will complete the first step. (Create Personal Automation-Settings-NFC)
Click Scan, and then scan the access card close to the top or back of the phone. If the scan is successful, the name tag will automatically pop up! (Scan-scan close to the phone-name)
Next, go directly to the next step, the next step, and you are done! (Next-Next-Finish)
Oh! By the way, at the end, remember to turn off " Ask before running ". That's OK!
Finally, put the phone close to the sensing area, and that's it.
Note: When testing, remember to bring the original card! Avoid failure without getting in. Let's talk about the world using the second generation of SE as an example. I have tried it and there is no problem, but the first generation of SE does not work! It is estimated that only XR cameras will work. Some encrypted cards can be added, but they may not work! This is the same as Android.
Quickly open picture command
If you have important pictures, you want to quickly open them with one click! For example, the two-dimensional code of WeChat ID or notification, etc., you can use this command! And the next instruction may be a bit difficult! Some basics are needed, but it's easy to follow Botantian's next step. First of all, this time we will use the " select picture ", " base64 encoding ", and " copy paper cut version " operations.
After the completion, there will be a three-step process! First of all, create shortcut instructions, add operations, click on App, photos, and select photos! The first step is complete. Next, add the Base64 encoding, click the + sign, script, slide to the file category below to find the Base64 encoding.
Finally, click on the + sign, share, find the copy to the clipboard and add it to it and it’s done! 1. (App-Photo-Select Photo) ; 2. (Script-Bsae64 encoding) ; 3. (Share-copy to clipboard)
Then run, select the picture, after the picture is encoded! Will get a string of codes .
At this point, we have actually completed one-half of the content!
The GIF demo is shown in the figure:
Finally, the next step is to name and save! Create another instruction, this step is to convert the picture into an encoded form. The step just now is to convert the picture into a code. The operation is very simple! Just three.
First, still the same, click the + sign to add text from the manuscript; then add Base64 encoding from the script, but this time, you need to click on the encoding and select the decoding;
Then, find the quick view in the preview item in the manuscript and add it. carry out! 1. (Manuscript-text) ; 2. (Script-Bsae64 encoding) ; 3. (Manuscript-quick view)
In the last step, paste the code of the first instruction transcoding in the text box , save and name it and it is OK! In fact, you can paste it directly, because the first step has been automatically copied to the clipboard.
Try to run it again!
How many shortcuts do you have
So much has been said above! So how many shortcuts do you have now? With this shortcut, you can calculate how many shortcuts you have now! Is it a bit convoluted?
In short, if you can't count the number of shortcuts, you can use this shortcut to see how many shortcuts you have.
World practice! First create a shortcut command, click the + sign, and search for "Get My" in the search box! A shortcut command will pop up! Click in and select "Get My Shortcut Instructions". (Search-enter to get mine-shortcut instructions-get my shortcut instructions)
Afterwards, add the "count" operation in the script and the project! (Script-Item-Count)
In the last step, in the script, notify the project to click "Display Results"! Shows the calculated results. (Script-Project-Display Results)
You can add the text you want to add before clicking the number, such as Bo Tan Tian Xia. . .
Finally, save the name and run it again!
You may find it very difficult to get started! But adding a sense of accomplishment after a successful operation is also self-evident. If you are patient, you might as well try it.
What is a shortcut command:
Apple’s official tutorial: https://support.apple.com/zh-cn/guide/shortcuts/welcome/ios
Tech Fox Demo: https://mp.weixin.qq.com/s/u5aUty2IvAQ1QnCLu6RKmA