Those who study computers should all install the system. Next, let’s talk about the process of downloading the Win10 system.
First , I will give you an address. Here , there will be methods and tools for installing the system on a U disk. I downloaded the following tool .
You can find it in the actual tutorial link, here is the address provided: How to create a USB flash drive installation medium in win10 system
Today is not the installation process, but after the installation, my 128G USB flash drive is displayed as follows:
only 31.9G left, surprised I also... (actually, it is not a problem with the USB flash drive).
First, check whether your USB flash drive has other partitions in my computer right-click -> manage -> disk management.
My disk partition is as follows:
There is still 83.59GB of unallocated space in the U disk, but it cannot be used. How can I combine it with a partition?
I searched on the Internet, but the method was unsuccessful or not daring to try...
You can give it a try,
Trial 1
Right-click under the disk partition -> Properties, then click Hardware -> Properties, select Volume -> Write, and see if it succeeds.
If you can, it's good, don't read it down, but I didn't.
Trial 2
- First download a U disk tool, DiskGenius, I downloaded version 3.4.5, which can be found on the Internet for the green version.
I have said a lot on the Internet, delete the partition and then expand, etc. Don’t try. If you are not careful, you will delete the memory of the U disk. - Open it and select your own USB flash drive (it must be your own USB flash drive). If you can't find it, see the arrow pointing to the right button in the figure below. Right-click the unpartitioned part of the USB flash drive to activate it.
Look again after activation, success!