1. Make good use of the magic wand method
Cutout with magic help is the most intuitive and basic cutout method. The scope of application is that the color difference between the image and the background is very obvious, the background color is single, and the image boundary is clear.
The magic wand cutout is to get the image you need by deleting the background color.
Method defects: it is useless for hair, and it cannot be done for more diversified pictures.
How to use the magic wand:
1. Click to open the "Magic Wand" tool;
2. In the "Magic Wand" toolbar, tick the "Continuous" item;
3. Fill in "10" for the "tolerance" value. (The value can be adjusted according to the effect afterwards, the smaller the value, the clearer the border of the picture, the larger the value, the more blurred the border);
4. Use the magic wand to click the background image, a virtual frame will appear to surround the background image;
5. If you are not satisfied with the range of the virtual frame, you can press CTRL+D to cancel the virtual frame, and then adjust the "tolerance" value in the previous step;
6. If you are satisfied with the range of the virtual frame, press the DELE key on the keyboard to delete the background color, and you will get a single image.
2. Color range-a very fast way to cut out
This method is also one of the basic methods. It is suitable for the obvious color difference between the image and the background, the background color is single, and the image has no background color. The method defect is relatively large: it is not applicable to the background color in the image.
Instructions:
1. The color straw picks up the background color;
2. Click the "Color Range" function in the "Select" function in the menu;
3. Check the "Reverse" item and select the image after confirming.
Third, the magnetic cable sleeve method ---cutting is more commonly used, convenient and accurate
Scope of application: clear image boundaries.
Method intent: The magnetic lanyard will automatically recognize the image boundary and automatically stick to the image boundary.
Method defects: the boundary points must be carefully placed where the boundary is blurred.
Instructions:
1. Select the lanyard tool-the magnetic lanyard tool;
2. Use the "magnetic lanyard" tool to slowly place along the image boundary, and a line between the two points will automatically adhere to the image boundary
3. After the sling is closed, the cutout is completed, and then press CTRL+J to copy the layer that has been cut out.
# Fourth, use the pen to cut out the image
1. First ctrl+j to copy a new layer
2. Click the pen, Then "path",
3. Hold down the ALT key and click on point A with a pen, hehe, the line segment to the left of point A disappears. . . Then continue to click back. . . . What if the line between the two points cannot coincide with the edge of the image no matter how you drag the mouse? Explain that there is a problem with your point, you can shorten the distance between the next two points and try it. . . (Note: If the above situation occurs, you can press Crtl+z to return to the previous step to re-point and hold down the mouse to continue dragging.)
The image you want to extract is framed by the flowing dotted line.
4. Use the shortcut keys. . . . Ctrl Shift+i (invert selection) now the flowing dotted line frames the periphery of the extracted image! Then click the Delete key on the keyboard (to delete the periphery of the selected image) and click the small eye on the background layer to see the effect. . .