Da Vinci Reversal Mechanism

Da Vinci Reversal Mechanism 1.
Parts needed:
1. Crank

2. Driven wheel

3. Base

4.

Drive wheel 5. Transmission part

6. Transmission rod

2. Production steps
1. Create a new assembly and insert it into the fixed base And the driven wheel.
2. Use a round edge line to coincide.
3. Insert the transmission parts.
4. Use coaxial and coincident fit to install the transmission part on the hole.
5. Fit the red driving wheel to the base, using a coaxial, coincident fit.
6. Insert the black transmission rod and fit it to the transmission block and drive wheel.
Note: The two drive wheels are upside down.
7. Insert the crank and fit it to the transmission rod.
8. Create a new motion calculation example, select basic motion or Motion analysis. (No Motion in 2018 version, basic motion can be selected)
9. Add a rotating motor to the handle, speed: 10.
10. Add contact group: driven wheel and two driving wheels.
12. Click: calculate.
13. Finish.
(It is the first time to make an assembly. If there is an error, please make sure.)