Part 1: Installation
Section 1: Mirror File
Download the latest version of the mining system, prepare a USB flash drive (usb3.0) above 8G, and decompress the downloaded image into a 5G IMG file;
Section 2: Install HDD Raw Copy Tool 1.10 or balenaEtcher
Section 3: Writing steps:
Part 2: Getting on the machine
Section 1: Enter BIOS mode
Press F2, del, or F12 when booting. Different motherboards have different keys. Most of them just press F12 or del.
Section 2: Turn off the UEFI mode and set the U disk to boot
into the BIOS, find the Launch CSM, select enable and press F10 to save and run
You need to select the USB flash drive to start at the USB flash drive, press F10 to select yes to save
Section 3: Open CSM
Launch CSM option should be set to Disabled, set it to enable
Section 4: Turn off the integrated graphics
Take Biostar motherboard as an example:
1. Enter the main BIOS interface
- Set the internal display in the chipset to disable
Primary display is set to auto;
Section 5: Insert the USB device
Here takes the written U disk as an example. After the above settings are completed, insert the purchased U disk into the usb interface, turn it on, and wait for tens of seconds after this interface appears after the boot is normal.
Part 3: System Settings
1. Register a central control account:
Account registration address: http://40451.net/
2 Set up mining pool and wallet and add central control:
The setting of the mine system is done on the webpage;
There are two modes of operation:
The first is a local area network no other computers, you need to re-operate on the mining machine, then you need to click the bottom left corner of the Start menu (Auto-hide), select the second set of WENCONFIG to above; (purse address longer , It is recommended to log in to the WeChat web version on the web at the same time, and send the wallet to the miner to copy and paste).
The second is that there are other hosts in the LAN that can be used, just open a browser on another computer, enter the ip address of the miner, and you can set it remotely (for easy pasting the wallet address);
Either way , this interface is opened:
Click parameter setting:
Part 4: Overclocking
common problem:
- How to connect remotely
- Browser connection: Open the browser, enter the ip of your mining machine and press Enter, a pop-up will pop up for you to enter the password and account name
- Teamviewer connection
- xshell connection
2 How to set timed restart
The path is in /etc/cron.d/default, you can create a new one if it does not exist
The specific format of the modified file is as follows:
Minute Hour Day Month Dayofweek command
Minute hour day month day every week order
0-59 0-23 1-31 1-12 0-6 (0 means Sunday, 1 means Monday)
For example:
The restart command is executed at 3:30 on the 10th and 20th of each month:
30 3 10,20 * * /etc/cron.d/default
The restart command is executed every day from 8-11 at 20:
20 8-11 * * * /etc/cron.d/default
The restart command is executed every 15 days at 6:30 every month:
30 6 */15 * * /etc/cron.d/default
Restart command is executed every 20 minutes
*/15 * * * * /etc/cron.d/default
Restart command executed at 5:30 every day
30 5 * * * /etc/cron.d/default
3How to enter BIOS mode?
After tens of seconds after booting, you can enter by pressing the del key. If you don't know how long to wait, I will teach you a dumb way. After pressing the power button, keep pressing the del key until you enter the BIOS interface. The following are the keys of different motherboards, most of which are F2, Ff12, and del keys. Different motherboards have different keys:
1. IBM (press F1 for cold boot, some new models can be started by pressing F1 when restarting)
2. HP (press F2 when starting and restarting)
3. SONY (press F2 when starting and restarting)
4. Dell (press F2 or del key during startup and restart)
5. Acer (press F2 during startup and restart)
6. Toshiba (press ESC and then F1 during cold boot)
7. Compaq (press F10 when the flashing cursor appears in the upper right corner after booting, or press F10 when booting)
8. Fujitsu (press F2 during startup and restart)
9. The vast majority of domestic and Taiwanese brands (press F2 when starting and restarting), and for some Tsinghua Tongfang, press ctrl+alt+s to enter