This article is based on the fact that weblogic has been installed on the linux server, and then a new domain is not accessible. The steps can be referred to as follows:
1. Enter the WebLogic management configuration directory, such as: cd /weblogic/wls1036/wlserver_10.3/common/bin
2. Execute the configuration script: sh config.sh or ./config.sh, the following figure appears
3. Select "1" in the configuration thought, then press Enter to enter the next step
4. Select "1" and click Enter to enter the next step
5. Select "x", then press Enter to go to the next step
6. Fill in the domain name, take jmsdomain as an example, as shown in the figure below, and press Enter
7. Enter directly, as shown below
8. Press Enter directly, use the default path, or enter the domain path yourself
9. Choose 1, modify the console user name
10. Set the user name, take wlsadmin as an example, and press Enter
11. Choose 2, set the console password, and press Enter
12. Set a password, take test4train as an example
13. Choose 3 to confirm the console password
14. Enter the password you entered before, and then press Enter to confirm
15. Choose 4, explain the domain (you can also press Enter to skip), and then press Enter
16. Set the domain description and press Enter
17. After setting the description, press Enter directly
18. Choose 2 here, production mode, and press Enter
19. Select jdk and press Enter
20. Then choose 2 to enter
21. Then select 1, and press Enter
22. Enter directly
23. Enter directly
24. Configure the port of the management server, select 3, the main server name is Adminserver by default, and you can also select 1 to modify.
25. Set the port number of the main server to 7000
26. Then press Enter directly (or select the ssl port to be monitored)
27 Then press Enter directly, if you want to set up a cluster, you can make related settings
28. Until success
