Reposted from: http://jingyan.baidu.com/article/9c69d48f44056c13c9024e13.html
Register an account
-
Dynamic domain names are charged and free of charge. Generally, families use them for free. You can find out a lot in Baidu. Take www.PubYun.com (previously called www.3322.org) as an example.
First, open www.PubYun.com. Click: Register.
-
To register for Four Steps, fill in the information first and request a mobile phone.
-
Then, activate the mailbox.
-
Through mobile phone authentication.
-
Congratulations, the registration is successful.
END
Apply for a free domain name
-
First, log in to www.PubYun.com, enter the username and password.
-
Find: PubYunDNS, click to create DNS resolution. Select from the drop-down menu: dynamic domain name settings.
-
Set up a domain name of your own, such as ghws.
-
As long as no one uses this domain name yet, congratulations, it's a success. As shown.
The full name of your domain name is: ghws.f3322.org
END
How to use and steps 1
-
There are two ways to use dynamic domain name, one is to use it through the client, and the other is to use it by binding the router device.
Let me talk about the first one.
Log in to the website, www.pubyun.com, enter the user name and password, and click: Service Support-Download Client.
-
Find a client suitable for your computer system. download.
-
Then install the client.
-
After the installation is complete, open the client.
-
Set up the login username and password, etc.
-
After success, you can see the icon in the lower right corner of the screen.
END
How to use and step 2
-
The second is to use it by binding the router equipment, that is, you can remotely log in to the router on the external network. Of course, you can also set port mapping in the router to achieve more functions.
First, log in to your router, enter your username and password.
-
Find: Dynamic domain name under advanced settings.
-
Find the corresponding WAN port and click Edit.
-
Click Enable first, and then enter your free dynamic domain name and password and your free domain name. Press apply.
-
Then, the router will prompt that it is saving. After saving, check if the connection is successful. As shown in the figure, that's it.
-
Let's test the effect. We used to log in to the router from the internal network. After the above operations are successful, we can remotely log in to the router from the external network. As shown.
Enter in the address bar: ghws.f3322.org:22222 (The port number is also set in the router, which is more secure)
-