Conditions for establishing a local area network
What I mean is the hardware aspect. For example, if two computers are connected to a router, can a LAN be established through settings? If you want to connect multiple computers in parallel. . . What hardware is still needed to establish a LAN? Thank you for your help
Establish a local area network. If the 2113 is not connected to the Internet, as long as the switch is used, the 5261 can be 4102. You can choose 4 ports, 8 ports, 16 ports, 24 ports, etc. according to how many 1653 computers need to be connected. Common brands are TP-LINK, DLINK etc. Each computer is connected to a port on the switch with a network cable. Then you need to set the IP address of each computer. Just make sure that the IP address of each computer is on the same network segment. For example, if you use the 192.168.1.0 network segment, then the IP address of each computer is 192.168.1.X(X It is any natural number between 1-255), the IP address of each computer cannot be repeated, and the subnet mask is filled with 255.255.255.0
so that each computer is in the same local area network. If you want to realize the Internet access function, you need to use a router. Connect the switch to the LAN port of the router, and then connect the dial-up modem of the telecommunication office to the WAN port of the router with a network cable. Finally, set the router to connect with the account password applied by the telecommunications bureau.
22
comment
share it
Report
babyAn Shiu
knows the partner financial securities expert recommended on 2016-08-06
attention
Conditions:
1: The network must be unblocked.
2: Install a server, the server must provide domain name service, and increase users with certain permissions.
3: At this point, any client in the LAN can log in to the domain server through the user and use the resources on it.
2
comment
share it
Report
Yangzhou
Chinasoft Xinan Network Technology Co., Ltd. 2020-06-05
This answer is provided by Yangzhou Chinasoft Xinan Network Technology Co., Ltd.
qfy85299835
2010-10-23
attention
Simply follow the network cable and hub.
Complex, routing, switches, firewalls, encryption machines...
2
comment
share it
Report Taiwan Yuhua Nashu2019-10-10
attention
A soho-level router 2113 is required.
After buying the 5261 router, we can start 4102 and start building a small local area network. At the same time as 1653, let multiple computers share a broadband line to surf the Internet.
Specific methods of construction:
1.
Connection method: plug the network cable crystal plug from the cat into the wan port of the router, and the computer is connected to any lan port of the router with a network cable.
2.
Simple router setup: log in to the management interface of the router according to the router's instructions (if you lose the instructions, try to enter 192.168.1.1 enter or 192.168.0.1 enter in the browser address bar, the default account password is usually admin), use In the setup wizard, select pppoe for the broadband connection type, then enter your Internet account and password below, then select automatic connection or on-demand connection, and then save. Then check whether the dhcp service has been started, and make it in the started (open) state. If you need to use wireless, you also need to enter the wireless setting page of the wireless router at the same time to enable the wireless function (usually a tick on the relevant page). Save and then exit.
Finally, enter the system tools and restart the router (simply unplug its power cord and wait a minute before plugging it in).
Other advanced settings about the router are not busy for the time being, and you can set them after you are familiar with the routing settings.
3.
Set up the computer: set the protocol tcp/ip properties. Right-click the local area connection-properties-network-protocol (tcp/ip)-properties-use the following ip address-each computer is set to "automatically obtain ip address", "automatically obtain dns address", confirm.