How to upgrade a 1602i/2620i/3550I thin AP to a fat AP
According to the conventional method, the upgrade can not be successful, every time it prompts "connection timeout" (connection timeout), more
Changing the network cable and changing the mask could not be solved. Later, the following methods were used to finally solve it:
1. First, press and hold the MODE button and then power on, release the indicator light after turning red to enter the "ap:" state, and then, do something
Initial configuration:
ap: flash_init
ap: set IP_ADDR 10.0.0.1
ap: set NETMASK 255.0.0.0
ap: set DEFAULT_ROUTER 10.0.0.2 (network card IP of the tftp server)
ap: tftp_init
ap: ether_init
2. Next, open the tftp server, in the AP, decompress the IOS of the fat AP of the tftp server to the specified in the AP
Path and set the boot image:
1. Unzip to the specified path:
ap: tar -xtract tftp://10.0.0.2/ap3g1-k9w7-tar.124-25d.JA2.tar flash:/
(Decompression process, omitted)
2. After the decompression is complete, set the boot image:
ap: set boot flash:/ap3g1-k9w7-tar.124-25d.JA2/ap3g1-k9w7-tar.124-25d.JA2
Three, confirm the configuration and restart
1. Use set to view the startup settings:
ap: set
You can see the following configuration:
“BOOT=flash: ap3g1-k9w7-tar.124-25d.JA2/ap3g1-k9w7-tar.124-25d.JA2
DEFAULT_ROUTER=10.0.0.2
ENABLE_BREAK=yes
IP_ADDR=10.0.0.1
MANUAL_BOOT=no
NETMASK=255.0.0.0
ROM_PERSISTENT_UTC=1348715355
TERMLINES=0”
2. Restart:
ap: boot
carry out.
WeChat consultationWeChat public account