figure 1
QDD-400-CUxM
400G QDD-400-CUxM module (FIG. 1) to support the main supports high bandwidth 400G and 400G Ethernet link rate. QSFP DD It provides a direct connection to copper QSFP DD solutions. QDD-400-CuxM for very short cable link, and provided a rack and the adjacent switch / router between the rack 400 QSFP-400G gigabit link established between a cost-effective port Methods. We currently offer of length x = 1,2,2.5 and 3-meter passive copper cable.
QDD-400-AOCxM
figure 2
QDD-400-AOCxM
QDD-400-AOCxM module with AOC cable (FIG. 2) suitable for short-distance, and provides a flexible manner in the frame and connected across racks. The active optical cable than copper thinner and lighter, which makes cable management easier. AOC enables efficient air flow system, which is critical in a high-density rack. We currently offer x = 1,2,3,5,7,10,15,20,25 length of 30 meters and active optical cables.
QDD-400G-LR8-S
image 3
QDD-400G-LR8-S
QDD-400G-LR8-S modules (FIG. 3) support up of 10 km of G.652 single-mode fiber (SMF) link length of a pair, with a dual LC connector and meet the standard IEEE 400GBASE LR8. 400 Gigabit Ethernet signal transmitted through the eight wavelengths. Eight wavelength multiplexing and demultiplexing in the Device Manager. FEC executed on the host platform.
QDD-400G-DR4-S
Figure 4
QDD-400G-DR4-S
QDD-400G-DR4-S block (FIG. 4) to support up to 500 meters in parallel by SMF link MPO-12 connector. Protocol and it complies with IEEE 802.3bs 400GAUI-8 / CEI-56G-VSR-PAM4 standard. 400 Gigabit Ethernet signal transmitted over four parallel channels, each channel wavelength. It can be transferred to a 4x100G QSFP28-100G-FR-S. FEC executed on the host platform.
QDD-400G-FR4-S
Figure 5
QDD-400G-FR4-S
QDD-400G-FR4-S modules (FIG. 5) to support the link up to 2km by SMF dual LC connector. It complies with IEEE 802.3bs, 100G Lambda MSA group of 400GBASE-FR4 specification and 400GAUI-8 / CEI-56G-VSR-PAM4 standard. 400 four Gigabit Ethernet signal transmitted through the optical wavelength CWDM grid. Four wavelength multiplexing and demultiplexing in the Device Manager. FEC executed on the host platform.
QDD-2X100G-SR4-S
Figure 6
QDD-2X100-SR4-S
QDD-2X100-SR4-S module (FIG. 6) to support up to 100 meters on OM4 MMF link length. MPO-24 MMF module connector. It meets the requirements of IEEE 802.3100gbase-SR4. The module provides backward compatibility for the two transceivers 100GBASE-SR4, improving the efficiency of traditional 100G optical port interfaces.
QDD-2X100G-CWDM4-S
Figure 7
QDD-2X100-CWDM4-S
QDD-2X100-CWDM4-S block (FIG. 7) supports up to 2km SMF link, and use both the CS connection is working. In line with 100G-CWDM4 MSA. 100 Gigabit Ethernet signals at a rate of 25Gb / s CWDM grid of four wavelengths of light transmission. Four wavelength multiplexing and demultiplexing in the Device Manager. FEC executed on the host platform.
For more information, please visit: www.idcfiber.com