btrfs.usage
Show in which disk the chunks are allocated.
CLI Example:
salt '*' btrfs.usage /your/mountpoint
btrfs.subvolume_exists
Check if a subvolume is present in the filesystem.
path
Mount point for the subvolume (full path)
CLI Example:
salt '*' btrfs.subvolume_exists /mnt/var
btrfs.subvolume_delete
Delete the subvolume(s) from the filesystem
The user can remove one single subvolume (name) or multiple of
then at the same time (names). One of the two parameters needs to
specified.
Please, refer to the documentation to understand the implication
on the transactions, and when the subvolume is really deleted.
Return True if the subvolume is deleted, False is the subvolume
was already missing.
name
Name of the subvolume to remove
names
List of names of subvolumes to remove
commit
* 'after': Wait for transaction commit at the end
* 'each': Wait for transaction commit after each delete
CLI Example:
salt '*' btrfs.subvolume_delete /var/volumes/tmp
salt '*' btrfs.subvolume_delete /var/volumes/tmp commit=after
btrfs.resize
Resize filesystem.
General options:
* **mountpoint**: Specify the BTRFS mountpoint to resize.
* **size**: ([+/-]<newsize>[kKmMgGtTpPeE]|max) Specify the new size of the target.
CLI Example:
salt '*' btrfs.resize /mountpoint size=+1g
salt '*' btrfs.resize /dev/sda1 size=max
btrfs.features
List currently available BTRFS features.
CLI Example:
salt '*' btrfs.mkfs_features
btrfs.subvolume_create
Create subvolume `name` in `dest`.
Return True if the subvolume is created, False is the subvolume is
already there.
name
Name of the new subvolume
dest
If not given, the subvolume will be created in the current
directory, if given will be in /dest/name
qgroupids
Add the newly created subcolume to a qgroup. This parameter
is a list
CLI Example:
salt '*' btrfs.subvolume_create var
salt '*' btrfs.subvolume_create var dest=/mnt
salt '*' btrfs.subvolume_create var qgroupids='[200]'
btrfs.subvolume_list
List the subvolumes present in the filesystem.
path
Mount point for the subvolume
parent_id
Print parent ID
absolute
Print all the subvolumes in the filesystem and distinguish
between absolute and relative path with respect to the given
<path>
ogeneration
Print the ogeneration of the subvolume
generation
Print the generation of the subvolume
subvolumes
Print only subvolumes below specified <path>
uuid
Print the UUID of the subvolume
parent_uuid
Print the parent uuid of subvolumes (and snapshots)
sent_subvolume_uuid
Print the UUID of the sent subvolume, where the subvolume is
the result of a receive operation
snapshots
Only snapshot subvolumes in the filesystem will be listed
readonly
Only readonly subvolumes in the filesystem will be listed
deleted
Only deleted subvolumens that are ye not cleaned
generation_cmp
List subvolumes in the filesystem that its generation is >=,
<= or = value. '+' means >= value, '-' means <= value, If
there is neither '+' nor '-', it means = value
ogeneration_cmp
List subvolumes in the filesystem that its ogeneration is >=,
<= or = value
sort
List subvolumes in order by specified items. Possible values:
* rootid
* gen
* ogen
* path
You can add '+' or '-' in front of each items, '+' means
ascending, '-' means descending. The default is ascending. You
can combite it in a list.
CLI Example:
salt '*' btrfs.subvolume_list /var/volumes/tmp
salt '*' btrfs.subvolume_list /var/volumes/tmp path=True
salt '*' btrfs.subvolume_list /var/volumes/tmp sort='[-rootid]'
btrfs.convert
Convert ext2/3/4 to BTRFS. Device should be mounted.
Filesystem can be converted temporarily so the further processing and rollback is possible,
or permanently, where previous extended filesystem image gets deleted. Please note, permanent
conversion takes a while as BTRFS filesystem needs to be properly rebalanced afterwards.
General options:
* **permanent**: Specify if the migration should be permanent (false by default)
* **keeplf**: Keep ``lost+found`` of the partition (removed by default,
but still in the image, if not permanent migration)
CLI Example:
salt '*' btrfs.convert /dev/sda1
salt '*' btrfs.convert /dev/sda1 permanent=True
btrfs.subvolume_find_new
List the recently modified files in a subvolume
name
Name of the subvolume
last_gen
Last transid marker from where to compare
CLI Example:
salt '*' btrfs.subvolume_find_new /var/volumes/tmp 1024
btrfs.delete
Remove devices from a BTRFS filesystem.
CLI Example:
salt '*' btrfs.delete /mountpoint /dev/sda1 /dev/sda2
btrfs.subvolume_snapshot
Create a snapshot of a source subvolume
source
Source subvolume from where to create the snapshot
dest
If only dest is given, the subvolume will be named as the
basename of the source
name
Name of the snapshot
read_only
Create a read only snapshot
CLI Example:
salt '*' btrfs.subvolume_snapshot /var/volumes/tmp dest=/.snapshots
salt '*' btrfs.subvolume_snapshot /var/volumes/tmp name=backup
btrfs.add
Add a devices to a BTRFS filesystem.
General options:
* **nodiscard**: Do not perform whole device TRIM
* **force**: Force overwrite existing filesystem on the disk
CLI Example:
salt '*' btrfs.add /mountpoint /dev/sda1 /dev/sda2
btrfs.subvolume_sync
Wait until given subvolume are completely removed from the
filesystem after deletion.
path
Mount point for the filesystem
subvolids
List of IDs of subvolumes to wait for
sleep
Sleep N seconds betwenn checks (default: 1)
CLI Example:
salt '*' btrfs.subvolume_sync /var/volumes/tmp
salt '*' btrfs.subvolume_sync /var/volumes/tmp subvolids='[257]'
btrfs.defragment
Defragment mounted BTRFS filesystem.
In order to defragment a filesystem, device should be properly mounted and writable.
If passed a device name, then defragmented whole filesystem, mounted on in.
If passed a moun tpoint of the filesystem, then only this mount point is defragmented.
CLI Example:
salt '*' btrfs.defragment /dev/sda1
salt '*' btrfs.defragment /path/on/filesystem
btrfs.version
Return BTRFS version.
CLI Example:
salt '*' btrfs.version
btrfs.subvolume_set_default
Set the subvolume as default
subvolid
ID of the new default subvolume
path
Mount point for the filesystem
CLI Example:
salt '*' btrfs.subvolume_set_default 257 /var/volumes/tmp
btrfs.mkfs
Create a file system on the specified device. By default wipes out with force.
General options:
* **allocsize**: Specify the BTRFS offset from the start of the device.
* **bytecount**: Specify the size of the resultant filesystem.
* **nodesize**: Node size.
* **leafsize**: Specify the nodesize, the tree block size in which btrfs stores data.
* **noforce**: Prevent force overwrite when an existing filesystem is detected on the device.
* **sectorsize**: Specify the sectorsize, the minimum data block allocation unit.
* **nodiscard**: Do not perform whole device TRIM operation by default.
* **uuid**: Pass UUID or pass True to generate one.
Options:
* **dto**: (raid0|raid1|raid5|raid6|raid10|single|dup)
Specify how the data must be spanned across the devices specified.
* **mto**: (raid0|raid1|raid5|raid6|raid10|single|dup)
Specify how metadata must be spanned across the devices specified.
* **fts**: Features (call ``salt <host> btrfs.features`` for full list of available features)
See the ``mkfs.btrfs(8)`` manpage for a more complete description of corresponding options description.
CLI Example:
salt '*' btrfs.mkfs /dev/sda1
salt '*' btrfs.mkfs /dev/sda1 noforce=True
btrfs.info
Get BTRFS filesystem information.
CLI Example:
salt '*' btrfs.info /dev/sda1
btrfs.properties
List properties for given btrfs object. The object can be path of BTRFS device,
mount point, or any directories/files inside the BTRFS filesystem.
General options:
* **type**: Possible types are s[ubvol], f[ilesystem], i[node] and d[evice].
* **force**: Force overwrite existing filesystem on the disk
* **set**: <key=value,key1=value1...> Options for a filesystem properties.
CLI Example:
salt '*' btrfs.properties /mountpoint
salt '*' btrfs.properties /dev/sda1 type=subvol set='ro=false,label="My Storage"'
btrfs.subvolume_get_default
Get the default subvolume of the filesystem path
path
Mount point for the subvolume
CLI Example:
salt '*' btrfs.subvolume_get_default /var/volumes/tmp
btrfs.subvolume_show
Show information of a given subvolume
path
Mount point for the filesystem
CLI Example:
salt '*' btrfs.subvolume_show /var/volumes/tmp
btrfs.devices
Get known BTRFS formatted devices on the system.
CLI Example:
salt '*' btrfs.devices
Æ Æ ?? ???? ???? zł CSZ å ??