[Statement] Bowen content is limited tutorial will be available, if infringement please let me delete, such as not timely reply or unclear please add micro-channel aopon007, if you can specify from CSDN very much hope to share with you through this platform CSDN
20 Spring term "computer aided design" online job usually 1
Paper Total: 100 Score: 100
a, multiple choice (a total of 10 questions, 50 points)
1. paste command file blocks are shortcuts in AutoCAD ()
the AV
B.CTRL the ATL + V +
C.CTRL the SHIFT + V +
D.CTRL + V
2. Shortcuts decomposition command in the CAD is ()
A.ex
Bf
C.cx
Dx
3. Shortcut keys in the CAD drawing an elliptical is ()
of Al
B.el
of Ca
Dc is
4. For CAD has a gradient fill () kinds of fixed pattern
A.7
B.8
C.9
D.10
The shortcut keys in the CAD drawing a rectangle as ()
Ac
B.pl
C.arc
D.rec
6. When using dynamic scaling of the three colors appear view window frame, wherein the blue wire frames ()
A. displayed in the current view area
B. drawing limits
C. dynamic rectangular frame
D. frame
7. When the print out, to make the print size on the drawing alphanumeric height of 5mm, a 1: 200 ratio of the printing, the font height should be ()
A.400
B.50
C.1000
D.100
8. Use command elongated, stretched length determination method are () species
A.1
B.2
C.3
D.4
9. To create the CAD rectangular array, must be specified ()
A. number of rows, the number of items and the cell size
the distance between the item number and item B.
Number C. rows, columns, and cell size
D. None of the above
10. bindings shortcuts in CAD external reference command is ()
Ax of
B.xa
C.xb
D.xc
Second, determine the questions (questions were 10, 50 points)
11. When changing the drawing limits the size distribution grid constant.
12. Once the current style to another style, the style will be canceled automatically replace.
13. The window scaling is a method commonly used in narrow pattern.
14 can rename xref-dependent layers.
15. In the "Capture Type" option in the area, capturing are two types: isometric snap and grid snap.
16. When the "capture" mode, the cursor can only be good to set a minimum spacing capture moving distance.
17. No matter how many "previous" option is used, only one object is selected.
18. Draw Splines tangential direction determining start and end points, different tangential direction not change the shape of the spline.
19. Continuous label command must be executed linear dimension, aligned labels, or labels to be used after the angle coordinate labels.
20. In AutoCAD, dynamic input can be used to replace the traditional AutoCAD command line.
