Etcd安装和使用
一.安装
1.1 二进制安装
从这里下载: etcd-v3.2.11-linux-amd64.tar.gz
下载包后解压即可运行：
# 解压
tar zxvf etcd-v3.2.11-linux-amd64.tar.gz
cd etcd-v3.2.11-linux-amd64
# ETCD版本
etcd --version
# 客户端接口版本
etcdctl --version
# API3的要这样
ETCDCTL_API=3 etcdctl version
# 启动也很简单
./etcd
# 试试
ETCDCTL_API=3 etcdctl --endpoints=localhost:2379 put foo bar
ETCDCTL_API=3 etcdctl --endpoints=localhost:2379 get foo1.2 源码安装
安装好Golang环境: 见Golang环境配置
go get -u -v https://github.com/coreos/etcd
./build启动:
./etcd1.3 docker安装
拉镜像:
docker pull quay.io/coreos/etcd启动:
docker run -it --rm -p 2379:2379 -p 2380:2380 --name etcd quay.io/coreos/etcd查询:
docker exec -it etcd etcdctl member list二.启动详细说明
2.1单机启动
./etcd --name my-etcd-1 --listen-client-urls http://0.0.0.0:2379 --advertise-client-urls http://0.0.0.0:2379 --listen-peer-urls http://0.0.0.0:2380 --initial-advertise-peer-urls http://0.0.0.0:2380 --initial-cluster my-etcd-1=http://0.0.0.0:23802.2集群启动
我们用三个端口2380,2381,2382来模拟集群(这三个是成员之间通信),2379,2389,2399是给客户端连接的.公网IP是: 172.16.13.90, 如果在本机模拟集群, 可以将172.16.13.90改为0.0.0.0
带advertise参数是广播参数: 如--listen-client-urls和--advertise-client-urls, 前者是Etcd端监听客户端的url,后者是Etcd客户端请求的url, 两者端口是相同的, 只不过后者一般为公网IP, 暴露给外部使用.
./etcd --name my-etcd-1 --listen-client-urls http://0.0.0.0:2379 --advertise-client-urls http://172.16.13.90:2379 --listen-peer-urls http://0.0.0.0:2380 --initial-advertise-peer-urls http://172.16.13.90:2380 --initial-cluster-token etcd-cluster-test --initial-cluster-state new --initial-cluster my-etcd-1=http://172.16.13.90:2380,my-etcd-2=http://172.16.13.90:2381,my-etcd-3=http://172.16.13.90:2382
./etcd --name my-etcd-2 --listen-client-urls http://0.0.0.0:2389 --advertise-client-urls http://172.16.13.90:2389 --listen-peer-urls http://0.0.0.0:2381 --initial-advertise-peer-urls http://172.16.13.90:2381 --initial-cluster-token etcd-cluster-test --initial-cluster-state new --initial-cluster my-etcd-1=http://172.16.13.90:2380,my-etcd-2=http://172.16.13.90:2381,my-etcd-3=http://172.16.13.90:2382
./etcd --name my-etcd-3 --listen-client-urls http://0.0.0.0:2399 --advertise-client-urls http://172.16.13.90:2399 --listen-peer-urls http://0.0.0.0:2382 --initial-advertise-peer-urls http://172.16.13.90:2382 --initial-cluster-token etcd-cluster-test --initial-cluster-state new --initial-cluster my-etcd-1=http://172.16.13.90:2380,my-etcd-2=http://172.16.13.90:2381,my-etcd-3=http://172.16.13.90:2382查看成员:
etcdctl member list使用时需要指定endpoints(默认本地端口2379), 集群时数据会迅速同步:
扫描二维码关注公众号，回复：
7661500 查看本文章
ETCDCTL_API=3 etcdctl --endpoints=127.0.0.1:2389 put foo xx
ETCDCTL_API=3 etcdctl --endpoints=127.0.0.1:2379 get foo2.3参数说明
|参数|使用说明|
|::----|----|
|--name
etcd0|本member的名字|
|--initial-advertise-peer-urls
http://192.168.2.55:2380|其他member使用，其他member通过该地址与本member交互信息。一定要保证从其他member能可访问该地址。静态配置方式下，该参数的value一定要同时在--initial-cluster参数中存在。memberID的生成受--initial-cluster-token和--initial-advertise-peer-urls影响。|
|--listen-peer-urls
http://0.0.0.0:2380|本member侧使用，用于监听其他member发送信息的地址。ip为全0代表监听本member侧所有接口|
|--listen-client-urls
http://0.0.0.0:2379|本member侧使用，用于监听etcd客户发送信息的地址。ip为全0代表监听本member侧所有接口|
|--advertise-client-urls
http://192.168.2.55:2379|etcd客户使用，客户通过该地址与本member交互信息。一定要保证从客户侧能可访问该地址 |
|--initial-cluster-token
etcd-cluster-2 |用于区分不同集群。本地如有多个集群要设为不同。|
|--initial-cluster
etcd0=http://192.168.2.55:2380,
etcd1=http://192.168.2.54:2380,
etcd2=http://192.168.2.56:2380|本member侧使用。描述集群中所有节点的信息，本member根据此信息去联系其他member。memberID的生成受--initial-cluster-token和--initial-advertise-peer-urls影响。|
|--initial-cluster-state
new|用于指示本次是否为新建集群。有两个取值new和existing。如果填为existing，则该member启动时会尝试与其他member交互。集群初次建立时，要填为new，经尝试最后一个节点填existing也正常，其他节点不能填为existing。集群运行过程中，一个member故障后恢复时填为existing，经尝试填为new也正常。|
|-data-dir|指定节点的数据存储目录，这些数据包括节点ID，集群ID，集群初始化配置，Snapshot文件，若未指定-wal-dir，还会存储WAL文件；如果不指定会用缺省目录。|
三.使用详细说明
ETCD API有两种, 一种是3, 一种是2, 默认为2, 我们主要用3:
API3:
superpika@superpika-chen-110:~/code/src/github.com/coreos/etcd/bin$ ETCDCTL_API=3 etcdctl put mykey "this is awesome"
OK
superpika@superpika-chen-110:~/code/src/github.com/coreos/etcd/bin$ ETCDCTL_API=3 etcdctl get mykey
mykey
this is awesomeAPI2是这样的(可以不加前缀)
superpika@superpika-chen-110:~/code/src/github.com/coreos/etcd/bin$ ETCDCTL_API=2 etcdctl set /local/dd d
d
superpika@superpika-chen-110:~/code/src/github.com/coreos/etcd/bin$ ETCDCTL_API=2 etcdctl get /local/dd
d
superpika@superpika-chen-110:~/code/src/github.com/coreos/etcd/bin$ ETCDCTL_API=2 etcdctl set /local/dd d
d
superpika@superpika-chen-110:~/code/src/github.com/coreos/etcd/bin$ ETCDCTL_API=2 etcdctl get /local/dd
d命令详解:
API2:
superpika@superpika-chen-110:~/code/src/github.com/coreos/etcd/bin$ ETCDCTL_API=2 etcdctl
NAME:
etcdctl - A simple command line client for etcd.
USAGE:
etcdctl [global options] command [command options] [arguments...]
VERSION:
3.1.0-rc.1+git
COMMANDS:
backup backup an etcd directory
cluster-health check the health of the etcd cluster
mk make a new key with a given value
mkdir make a new directory
rm remove a key or a directory
rmdir removes the key if it is an empty directory or a key-value pair
get retrieve the value of a key
ls retrieve a directory
set set the value of a key
setdir create a new directory or update an existing directory TTL
update update an existing key with a given value
updatedir update an existing directory
watch watch a key for changes
exec-watch watch a key for changes and exec an executable
member member add, remove and list subcommands
user user add, grant and revoke subcommands
role role add, grant and revoke subcommands
auth overall auth controls
GLOBAL OPTIONS:
--debug output cURL commands which can be used to reproduce the request
--no-sync don't synchronize cluster information before sending request
--output simple, -o simple output response in the given format (simple, `extended` or `json`) (default: "simple")
--discovery-srv value, -D value domain name to query for SRV records describing cluster endpoints
--insecure-discovery accept insecure SRV records describing cluster endpoints
--peers value, -C value DEPRECATED - "--endpoints" should be used instead
--endpoint value DEPRECATED - "--endpoints" should be used instead
--endpoints value a comma-delimited list of machine addresses in the cluster (default: "http://127.0.0.1:2379,http://127.0.0.1:4001")
--cert-file value identify HTTPS client using this SSL certificate file
--key-file value identify HTTPS client using this SSL key file
--ca-file value verify certificates of HTTPS-enabled servers using this CA bundle
--username value, -u value provide username[:password] and prompt if password is not supplied.
--timeout value connection timeout per request (default: 2s)
--total-timeout value timeout for the command execution (except watch) (default: 5s)
--help, -h show help
--version, -v print the versionAPI3:
superpika@superpika-chen-110:~/code/src/github.com/coreos/etcd/bin$ ETCDCTL_API=3 etcdctl
NAME:
etcdctl - A simple command line client for etcd3.
USAGE:
etcdctl
VERSION:
3.1.0-rc.1+git
API VERSION:
3.1
COMMANDS:
get Gets the key or a range of keys
put Puts the given key into the store
del Removes the specified key or range of keys [key, range_end)
txn Txn processes all the requests in one transaction
compaction Compacts the event history in etcd
alarm disarm Disarms all alarms
alarm list Lists all alarms
defrag Defragments the storage of the etcd members with given endpoints
endpoint health Checks the healthiness of endpoints specified in `--endpoints` flag
endpoint status Prints out the status of endpoints specified in `--endpoints` flag
watch Watches events stream on keys or prefixes
version Prints the version of etcdctl
lease grant Creates leases
lease revoke Revokes leases
lease timetolive Get lease information
lease keep-alive Keeps leases alive (renew)
member add Adds a member into the cluster
member remove Removes a member from the cluster
member update Updates a member in the cluster
member list Lists all members in the cluster
snapshot save Stores an etcd node backend snapshot to a given file
snapshot restore Restores an etcd member snapshot to an etcd directory
snapshot status Gets backend snapshot status of a given file
make-mirror Makes a mirror at the destination etcd cluster
migrate Migrates keys in a v2 store to a mvcc store
lock Acquires a named lock
elect Observes and participates in leader election
auth enable Enables authentication
auth disable Disables authentication
user add Adds a new user
user delete Deletes a user
user get Gets detailed information of a user
user list Lists all users
user passwd Changes password of user
user grant-role Grants a role to a user
user revoke-role Revokes a role from a user
role add Adds a new role
role delete Deletes a role
role get Gets detailed information of a role
role list Lists all roles
role grant-permission Grants a key to a role
role revoke-permission Revokes a key from a role
help Help about any command
OPTIONS:
--cacert="" verify certificates of TLS-enabled secure servers using this CA bundle
--cert="" identify secure client using this TLS certificate file
--command-timeout=5s timeout for short running command (excluding dial timeout)
--dial-timeout=2s dial timeout for client connections
--endpoints=[127.0.0.1:2379] gRPC endpoints
-h, --help[=false] help for etcdctl
--hex[=false] print byte strings as hex encoded strings
--insecure-skip-tls-verify[=false] skip server certificate verification
--insecure-transport[=true] disable transport security for client connections
--key="" identify secure client using this TLS key file
--user="" username[:password] for authentication (prompt if password is not supplied)
-w, --write-out="simple" set the output format (json, proto, simple, table)