新手在使用IDLE的过程中，肯定遇到麻烦的清屏问题，本次找到了简单高效的清屏解决方案：
首先在文本编译器里输入以下代码：
"""
Clear Window Extension
Version: 0.2
Author: Roger D. Serwy
[email protected]
Date: 2009-06-14
It provides "Clear Shell Window" under "Options"
with ability to undo.
Add these lines to config-extensions.def
[ClearWindow]
enable=1
enable_editor=0
enable_shell=1
[ClearWindow_cfgBindings]
clear-window=<Control-Key-l>
"""
class ClearWindow:
menudefs = [
('options', [None,
('Clear Shell Window', '<<clear-window>>'),
]),]
def __init__(self, editwin):
self.editwin = editwin
self.text = self.editwin.text
self.text.bind("<<clear-window>>", self.clear_window2)
self.text.bind("<<undo>>", self.undo_event) # add="+" doesn't work
def undo_event(self, event):
text = self.text
text.mark_set("iomark2", "iomark")
text.mark_set("insert2", "insert")
self.editwin.undo.undo_event(event)
# fix iomark and insert
text.mark_set("iomark", "iomark2")
text.mark_set("insert", "insert2")
text.mark_unset("iomark2")
text.mark_unset("insert2")
def clear_window2(self, event): # Alternative method
# work around the ModifiedUndoDelegator
text = self.text
text.undo_block_start()
text.mark_set("iomark2", "iomark")
text.mark_set("iomark", 1.0)
text.delete(1.0, "iomark2 linestart")
text.mark_set("iomark", "iomark2")
text.mark_unset("iomark2")
text.undo_block_stop()
if self.text.compare('insert', '<', 'iomark'):
self.text.mark_set('insert', 'end-1c')
self.editwin.set_line_and_column()
def clear_window(self, event):
# remove undo delegator
undo = self.editwin.undo
self.editwin.per.removefilter(undo)
# clear the window, but preserve current command
self.text.delete(1.0, "iomark linestart")
if self.text.compare('insert', '<', 'iomark'):
self.text.mark_set('insert', 'end-1c')
self.editwin.set_line_and_column()
# restore undo delegator
self.editwin.per.insertfilter(undo)
保存为ClearWindow.py文件，将这个文件放在Python X\Lib\idlelib目录下（X为你的python版本），然后在这个目录下找到config-extensions.def这个文件（idle扩展的配置文件），以记事本的方式打开它
打开config-extensions.def 后在句末加上这样几句：
[ClearWindow]
enable=1
enable_editor=0
enable_shell=1
[ClearWindow_cfgBindings]
clear-window=<Control-Key-l>
然后保存退出就可以了。
打开python的idle，看看options是不是多了一个选项clear shell window ctrl+L
如果是这样的话，那就证明你安装成功了，以后要清屏直接ctrl+L就可以了，so ez ：）。