ubuntu下安装skyeye方法

一. 前言
　　Skyeye是一个嵌入式开发板模拟软件，支持多种指令集、多种CPU。本文介绍Skyeye-1.3.5工具的安装。基于以下环境：
　　1. Ubuntu14.04 LTS (32位), 运行于VMWare虚拟机中；
　　2. Skyeye-1.3.5；
 
二、 准备
　　1. 下载Skyeye-1.3.5源代码
　　下载地址：https://sourceforge.net/projects/skyeye/files/skyeye/
 
hello@hello-pc:~/Desktop$ ls skyeye-1.3.5_rc1.tar.bz2
skyeye-1.3.5_rc1.tar.bz2
hello@hello-pc:~/Desktop$ tar -vxf skyeye-1.3.5_rc1.tar.bz2
　　
　　2. 下载并安装所需依赖库（libiconv-1.14.tar.gz);
（说明：此处参考：http://www.codeweblog.com/skyeye-1-3-5安装过程）
hello@hello-pc:~/Desktop$ ls libiconv-1.14.tar.gz
libiconv-1.14.tar.gz
hello@hello-pc:~/Desktop$ tar -vxf libiconv-1.14.tar.gz

hello@hello-pc:~/Desktop$ cd
libiconv-1.14/              Python-2.7/                 skyeye-testsuite-1.3.4_rc1/ vmware-tools-distrib/
hello@hello-pc:~/Desktop$ cd libiconv-1.14/
hello@hello-pc:~/Desktop/libiconv-1.14$ ls
ABOUT-NLS   ChangeLog      configure     DESIGN        HACKING          libtool         man    PORTS         src       THANKS
aclocal.m4  config.h       configure.ac  djgpp         include          m4              NEWS   preload       srclib    tools
AUTHORS     config.h.in    COPYING       doc           INSTALL.generic  Makefile        NOTES  README        srcm4     windows
autogen.sh  config.log     COPYING.LIB   extras        lib              Makefile.devel  os2    README.djgpp  stamp-h1  woe32dll
build-aux   config.status  DEPENDENCIES  gnulib-local  libcharset       Makefile.in     po     README.woe32  tests
hello@hello-pc:~/Desktop/libiconv-1.14$ ./configure ; sudo make ; sudo make install

 
　　若make install过程出现错误：./stdio.h:1010:1: error: 'gets' undeclared here (not in a function)，需要修改如下：
　　(说明：此处参考：http://blog.csdn.net/chentianveiko/article/details/51498831)
hello@hello-pc:~/Desktop/libiconv-1.14$ gvim ./srclib/stdio.h

_GL_CXXALIAS_SYS (gets, char *, (char *s));
#  undef gets
# endif
_GL_CXXALIASWARN (gets);
/* It is very rare that the developer ever has full control of stdin,
   so any use of gets warrants an unconditional warning.  Assume it is
   always declared, since it is required by C89.  */
#if defined(__GLIBC__) && !defined(__UCLIBC__) && !__GLIBC_PREREQ(2, 16) /*Add here*/
_GL_WARN_ON_USE (gets, "gets is a security hole - use fgets instead");
#endif

#endif

注意：修改完stdio.h后还需要修改stdio.in.h，代码是一样的

 
3. 下载并安装所需依赖库（Python-2.7);
（说明：此处参考：http://www.codeweblog.com/skyeye-1-3-5安装过程）
按 Ctrl+C 复制代码

按 Ctrl+C 复制代码
说明：若不正常安装Python-2.7, skyeye安装会出现如下错误；
sudo apt-get install python-dev

    -g -O2 -MT pycli.lo -MD -MP -MF .deps/pycli.Tpo -c -o pycli.lo `test -f 'pycli/pycli.c' || echo './'`pycli/pycli.c
/bin/bash: python-config: command not found
libtool: compile:  gcc -g -O2 -D_FILE_OFFSET_BITS=64 -DSTANDALONE -DDEFAULT_INLINE=0 -DSKYEYE_BIN=\"/opt/skyeye/bin/\" -g -O2 -Werror-implicit-function-declaration -Werror=return-type -Wmissing-field-initializers -Wuninitialized -I. -I.. -I../third-party/include/ -I../third-party/bfd/ -I../third-party/bfd/ -I../common -I../common/include -I./common/ -g -O2 -MT pycli.lo -MD -MP -MF .deps/pycli.Tpo -c pycli/pycli.c  -fPIC -DPIC -o .libs/pycli.o
pycli/pycli.c:1:20: fatal error: Python.h: No such file or directory
 #include <Python.h>
                    ^
compilation terminated.
make[2]: *** [pycli.lo] Error 1
make[2]: Leaving directory `/home/hello/skyeye/skyeye-1.3.5_rc1/utils'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/hello/skyeye/skyeye-1.3.5_rc1'
make: *** [all] Error 2
hello@hello-pc:~/skyeye/skyeye-1.3.5_rc1$ gvim pycli/pycli.c

 
4. 安装所需依赖库
hello@hello-pc:~/Desktop/Python-2.7$ sudo apt-get install libgtk2.0-dev pkg-config libatk1.0-dev
hello@hello-pc:~/Desktop/Python-2.7$ sudo apt-get install libpango1.0-dev libfreetype6-dev libglib2.0-dev libx11-dev binutils-dev
hello@hello-pc:~/Desktop/Python-2.7$ sudo apt-get install libncurses5-dev libxpm-dev libltdl-dev
hello@hello-pc:~/Desktop/Python-2.7$
 
三、 安装Skyeye-1.3.5

hello@hello-pc:~/Desktop$ cd ../skyeye/skyeye-1.3.5_rc1/
hello@hello-pc:~/skyeye/skyeye-1.3.5_rc1$ ls
aclocal.m4          bochs_config.h.in  config.log     Doxyfile    ltdlconf.h        Makefile.in        pyshell         stamp-h2
android             ChangeLog          config.status  emulator    ltdlconf.h.in     misc               README          stamp-h3
android_emulator.o  common             config.sub     gui         ltmain.sh         missing            REPORTING-BUGS  testsuite
arch                conf               configure      INSTALL     m4                mknandflashdump    setenv.o        third-party
AUTHORS             config.guess       configure.in   install-sh  MAINTAINERS       mknandflashdump.o  skyeye          TODO
autogen.sh          config.h           COPYING        libltdl     Makefile          NEWS               skyeye.o        uart_console.o
autom4te.cache      config.h.in        depcomp        libtool     Makefile.am       prof_convert       soc             uart_instance
bochs_config.h      config.h.in~       device         LICENSE     Makefile.android  prof_convert.o     stamp-h1        utils
hello@hello-pc:~/skyeye/skyeye-1.3.5_rc1$ sudo make
hello@hello-pc:~/skyeye/skyeye-1.3.5_rc1$ sudo make install
hello@hello-pc:~/skyeye/skyeye-1.3.5_rc1$ sudo make install_lib
hello@hello-pc:~/skyeye/skyeye-1.3.5_rc1$

 
四、启动skyeye

hello@hello-pc:/opt/skyeye$ cd /opt/skyeye/
hello@hello-pc:/opt/skyeye$ ls
bin  include  info  lib  testsuite
hello@hello-pc:/opt/skyeye$ cd testsuite/arm_hello/
hello@hello-pc:/opt/skyeye/testsuite/arm_hello$ ../../bin/skyeye -e arm_hello
SkyEye 1.3.5
SkyEye is an Open Source project under GPL. All rights of different parts or modules are reserved by their author. Any modification or redistributions of SkyEye should not remove or modify the annoucement of SkyEye copyright.
Get more information about it, please visit the homepage http://www.skyeye.org.
Type "help" to get command list.
 (skyeye)