The iPad black screen is inexplicable, and then long press the power button and the screen cannot be turned on? This may be a failure of the iPadOS system, teach you these 3 solutions!
The iPad black screen for no reason, and then long press the power button can not turn on the screen. Have you encountered the problem that the iPad suddenly goes black and cannot be turned on?
Especially when the iPad is upgraded, flashed, jailbroken, etc., there are more frequent black screen restarts, or completely black screens that cannot be turned on. It must be a hardware failure such as the battery, which is scrapped?
In fact, if the iPad has a black screen failure, it may also be a failure of the iPadOS system. I will teach you these 3 solutions!
Method 1: Force restart
When the iPad encounters an inexplicable black screen, a sudden black screen and cannot be turned on, you can first try to force restart it.
iPad forced restart operation:
1. Full-screen iPad: quickly press the volume up and down keys respectively, and then continue to press the power button until the Apple logo appears after the black screen of the device, release the button and wait for the iPad to start;
2. iPad with a Home button: Press and hold the Home button and the Power button at the same time until the Apple logo appears after the black screen of the device, release the button and wait for the iPad to start.
If it cannot return to normal, or there will still be an inexplicable black screen, shutdown and restart in the later stage, you can refer to method 2 again.
Method 2: iPadOS System Repair
When the iPad has a system failure, it is recommended to use the iPadOS system repair tool to repair it, such as Niu Xuechang’s Apple mobile phone repair tool, which can repair 150+ iPadOS system failures.
Common such as white apple, black screen, stuck in recovery mode, device infinite loop, unable to boot, stuck update process, etc.
You can use Niu Xuechang's Apple system repair tool to repair, the "standard repair" mode will not lose data, and the repair success rate is as high as 80%!
Step 1: Download and install Niu Xuechang’s Apple mobile phone repair tool, connect the device to the computer through a data cable, and click the “Start” button under “Fix iOS system problems”.
Step 2: Select the repair mode, choose "Standard Repair" first, and the device data will not be lost.
Step 3 : Click "Download Firmware", after the firmware download is complete, you can start "Standard Repair". The whole repair process takes about 10 minutes, just wait patiently for the repair process to finish.
Method 3: Update the system and applications in time
The iPadOS system may be incompatible with software applications, which may seriously cause a black screen on the device.
Occasional restarts or inexplicable black screen restarts caused by opening a specific APP are most likely caused by conflicts or incompatibility between the iPadOS system and some installed APPs.
It is recommended to update the iPadOS system in time, uninstall the APP or update the APP in time.
In addition to the above three situations, when the iPad battery health is far below 80%, it may also cause frequent shutdowns, black screens, inexplicable restarts and other problems. It is recommended to pay attention to the iPad battery health in time.
