Line 1 is an IO. Line 4 is 4 IO. 4 line faster. But here with 1 or 4, you need to see to configure SPI NAND chips such as default on SPI NAND device is powered mode is 1-wire SPI mode, where you will boot startup mode must be set to 1 line. For example, after a point on the NAND SPI mode is the default device 4 wire SPI mode, where you have to set four lines.
In short, use 1 or 4, depending on your SPI NAND device selection.
mengxp published in 2018-5-3 16:41
1 line is an IO. Line 4 is 4 IO. 4 line faster.
But here with 1 or 4, you need to see to configure SPI NAND chips
such as SPI NAN ...