For many small partners to learn CAD in terms of not only drawing is a need for continuous learning content, learning how to view the process view architectural drawings is also a need to learn how to view architectural drawings? What CAD fast plug-skills? Here and small partners to share architectural drawings to see how it!
First, the design description
Design description includes the structure of the building instructions and description, so that you get an overview of the building, location, elevation, material requirements, quality standards, construction considerations as well as some special technical requirements, form an initial impression in terms of ideology.
Second, the foundation drawing
See generally FIG foundation base type, and checks the type of reinforcement is disposed between the base and the anchor and the wall, and even the base beam, with the column base, collector and note down the plate portion and the reinforcement anchorage elevation portion form puddles, and so the elevator shaft. Columns Reinforcement table legends and prone label does not match the required reference position and carefully check the plan dimensions, reinforcement and the like; a control portion back strip is an important part of the foundation construction.
Third, the standard floor plan
Plan view wall studs, floor and other drawings as if there is time to verify the distribution of tendons reinforced floor cloth, tendons and distribution specification and quantity. The site description reference should be checked in the corresponding content. Construction segment is divided try to avoid the stairwells, elevators, bathrooms and other post-waterproof function room to be done to reduce post-leakage risks.
Fourth, the roof plan
Roof plan Roof plan need to refer to building construction, roofing practices and to find the slope, to ensure flashings height of not less than 250mm, part drawings easy to find the slope after the flood water height is less than 250mm, if the problem occurs, and whether the design needs to communicate raise the parapet level.
Fifth, building plans
Building plans, the concern with the doors and windows doors and elevation chart elevation of the label are the same; whether parapet elevation and structure of the figure in terms of consistency; ceiling height in the room whether the pipeline conflicting device map.
How to open the CAD drawing to view it?
1, search "CAD Online Figure" in our any browser installed on your computer, click to access the associated pages!
2, search for "online Figure" After entering the relevant page, select the "Online Figure" at the head of navigation "Online Convert" you can enter the plug-in page friends.
3, after entering CAD plug-page, click "Choose File" as shown, or "open file" button in the dialog box to find the open bomb CAD drawings storage path, click on the drawing icon, you can be what we need PDF Figure drawings add to our page it!
4, into the plug-page, we can be free of CAD drawings to view it! Gadgets can also be a toolbar on the left of file dwg files simple operation Oh!
Well, that's little friends and share CAD drawings quickly see the skills, and hope to help small partners o!