The EasyCVR video fusion platform is based on the cloud-edge-end integrated architecture, which can support multi-protocol and multi-type device access. In terms of video capabilities, the platform can realize video live broadcast, video recording, playback, retrieval, cloud storage, alarm reporting, voice intercom, Electronic maps, clusters, intelligent analysis, and platform cascading, etc. The platform has strong scalability, high openness, quick deployment, supports massive video aggregation management, and supports integration with third parties.
Because the platform cascading function is widely used in projects, and users also consult a lot, today we will introduce how EasyCVR configures platform cascading. The specific operation steps are as follows:
1. Platform cascading
In cascading, EasyCVR can be used as a lower-level platform or as a higher-level platform, and supports cascading multiple upper-level platforms at the same time.
When used as the upper-level platform, the lower-level platform can configure the SIP information of EasyCVR according to the device access method;
When it is used as a lower-level platform, you need to "add a higher-level platform" in [Configuration Center] - [National Standard Cascading], as shown below:
Among them, the "local port" is a registered port, so it should maintain uniqueness when cascading different upper-level platforms, and the server should also open the corresponding port. The open protocol can be TCP/UDP, which corresponds to the "transport protocol" selection below.
In addition, if the "SIP authentication user" needs to be filled in Chinese, it needs the support of the upper platform (that is, no verification is required), otherwise the 20-digit national standard code shall prevail.
2. Channel push
1) Direct push channel method
After adding and configuring the upper-level platform, click the channel bar button and select the channel to be pushed, as follows:
2) Sharing node push organization method
First add the upper-level platform, and then configure the grouping information according to the organizational form that needs to be pushed, as follows:
After the configuration is complete, click the "Share Node" button to push. On the "Shared Node" page, select the upper-level platform name to be pushed in "Cascade Code":
After the push is successful, the upper-level platform will display this organization. The first-level directory is the name or code of the "SIP authentication user" when adding the upper-level platform, and the second-level and lower directories are the configured grouping structure, as follows:
Special Note: The above example is the operation of EasyCVR as the upper and lower levels of each other. If you need to register to the national standard platform with a gateway such as Haikang and Huawei, you need to actively add the domain information of the lower level EasyCVR in the upper level and do a search.
The above are the operation steps for cascading configuration of the EasyCVR platform.
The EasyCVR platform has strong compatibility and high expansion, and can support multi-protocol and multi-type device access, including: national standard GB28181, RTMP, RTSP/Onvif, Hikvision Ehome, Hikvision SDK, Dahua SDK, Uniview SDK, etc. The platform can distribute video streams in RTMP, RTSP, HLS, HTTP-FLV, WS-FLV, WebRTC and other formats, and supports H.264/H.265 encoding. Interested users can go to the demonstration platform for experience or deployment testing.