Computers are one of the most commonly used tools for modern people, and it is also very important to choose an operating system that suits you. Today, there are many common computer systems on the market to choose from, such as Windows, MacOS, Linux and so on. So, what system is best to use? Different computer systems have different functions. You have to choose one that suits you to ensure the experience of office work and games. So, what kind of system is right for you? Leave the comment area to you [呲牙]
Let's come together
Quickly install computer system
the process is very simple
One word: super easy to use
you can't miss it
Then get started right away!
↓↓↓
1. Installation method
The first: ( Windows installer )
1. Insert the prepared PE tool (U disk). Turn on the computer and press the corresponding startup option key (one-key U disk startup shortcut key query | boot into BIOS key query).
Note: There are many PE tools on the Internet, and they are all free to download and make.
2. Enter the PE system. Generally, there will be a lot of practical tools that can be used as computer repair tools. Double-click to open the Windows installer.
3. Select three corresponding drive letters. As shown in the figure below, TiKi has explained them one by one. (Before installation, the disk where the system will be installed will be formatted once, so don’t make a wrong choice when choosing)
Note : GPT+UEFI installation system, the above ②boot drive and ③ are not the same disk, the boot disk is FEI partition. MBR+BIOS installation system ②③ is assigned to the same disk.
The drive letter of the boot drive can be viewed with the diskGenius tool in PE under normal circumstances. It is displayed on the top of a hard disk, the size is 100M, and the name is ESP . Under normal circumstances, this drive letter is hidden.
If the boot partition does not have a drive letter (hidden), then you can use the diskgenius tool to assign you a drive letter
4. After selecting the three parameters, click the Start Installation button.
5. A prompt box will pop up, and you can directly confirm without any operation.
6. Enter the deployment and installation state. After the deployment is complete, restart the computer.
7. After restarting, the system enters the automatic installation state, and this process takes about 20 minutes. Follow the prompts to complete the system installation and setup.
The second type: ( CGI backup and restore tool )
1. Enter the PE system, double-click to open the CGI backup and restore tool on the desktop. Select the restore partition , select which disk you want to install, the default is to install on the C drive. Then click the lower right corner to select the image file (sometimes it will automatically select for you). If there is no problem, just click the execute button directly.
2. In the pop-up window, select to check Restart, and click OK. After that, it will completely enter the automatic mode, and you hardly need to operate any buttons in the middle.
The third type: (one-key installation tool)
1. After entering the PE system, the installation window will pop up automatically (if it does not pop up, please double-click the one-key installation on the desktop).
Select the prepared image file (the image file stored in the U disk will be automatically recognized and displayed, and other drive letters stored in the computer need to click the Open button to find and open).
Select the drive letter C to be installed. Generally, the first one is the C drive. Then click OK.
2. A dialog box pops up, click Yes.
3. The system starts to enter GHOst copying, which needs to wait for a while.
4. After copying, a prompt will pop up. Click Yes or Don’t Care, and the system will restart automatically.
5. After restarting, the system will start to automatically install the computer without any operation, and it may restart automatically in the middle.
The fourth type: (Ghost guide installation)
1. Enter the PE system and click to run ghost.
2. Click OK.
3. Click local——partition——From Image in turn.
4. Select the location of the GHO system image file you downloaded and decompressed.
5. Click OK
6. Select your hard drive. The hard disk to be installed must be accurately selected, which can be determined according to the size of the hard disk. (Normal user computer is a hard disk, which is a better choice)
7. Select the drive letter to be installed, usually the C drive, and the second one is the C drive. The first one is that the EFI boot disk is not allowed to be selected by default.
8. The final confirmation, if you confirm that there is nothing wrong, just click YES to start the installation.
9. After the installation is complete, click the first button in the picture below to exit.
At this time, restarting the system is unable to enter the system. Do not restart the system, continue to the next step.
10. Open the UEFI boot modification in the start menu.
11. Click Mount.
12. Open the diskGenius software on the desktop to check the drive letter of the ESP , here is Z
13. Then select Z in the ESP partition.
14. Click the root directory of the Windows system.
15. Select windows under the C disk, and then confirm.
16. Click Start Repair.
17. At this time, open the Z disk, and you will find an EFI folder inside, indicating that the boot repair is successful.
2. Activation tool
Unactivated Windows system cannot set the desktop background, theme color, font size, start menu, taskbar and desktop icons in personalization. After opening, it will prompt that the Windows system needs to be activated before it can be set.