The installation of nuke has been unsuccessful before. After searching the Internet for a long time, I finally found a solution, and finally the installation was successful. Now I will share the installation and cracking method of nuke, taking nuke11 as an example:
1. Install the software normally:
2. Install the FLT7 license manager:
3. Stop the "Foundry License Server" service in the service.
win+R --> enter services.msc
4.
Copy the "rlm.foundry.exe" file to the following path and replace the original file.
C:\Program Files\The Foundry\LicensingTools7.1\bin\RLM\
5. In the start program, right-click to run the
Foundry License Utility as an administrator and select Diagnostics - Run Diagnostics. As shown in the figure:
(1) Select Diagnostics--Run Diagnostics. Copy the Host name and Host ID.
(2) Open the "xf_foundry.lic" file with Notepad or other text editor, and edit the HOST NAME and MAC ADDRESS at the beginning of the file. Among them, HOST NAME is your computer name, MAC ADDRESS is your physical address, that is, Host ID.
(3) Important: The port is not set as default, but changed to 4101. (Note: There should be a space between
HOST NAME, MAC ADDRESS
and PORT) as shown below:
Save the edited xf_foundry.lic file, copy and paste it to
C:\ProgramData\The Foundry\RLM.
(4) At the same time, drag the edited xf_foundry.lic file to the License Install of the Foundry License Utility . You need to see the certificate after dragging in to display 4101.
6. Select RLM Server -- Start Server, and you can see the relevant license information after it is successfully opened.
7.
Open the software, a LicenseError will appear. Select Install License—UseServer in turn, enter: [email protected] in the address bar, and then click install
8. From the drop-down box that pops up, select "RLM Server", click ok, and then exit.
9. There is no problem with the last startup.
